Kenmore 116.29912 owner manual Hood And Cover, Canister, Hose, not twisted, = To remove

CANISTER

1oOpen the canister hood.

2.Check to see that the dust bag is properly instalted. See BAG CHANGING for instruc- tions,

3.Check to see that the motor safety filter is

properly installed See MOTOR SAFETY FIL- TER CLEANING for instructions.

HOOD AND COVER

It is normal for the canister hood and cover to come off when opened further than need- ed, Line up the hinge slots, insert them, and close the hood and/or cover to replace it.

CAUTION

Never open canister hood with the cover open. This will help to prevent

damage from occurring to the canister hood and!or cover.

HOSE

1.Line up the hose latch tab and notch in can- ister hood and insert hose into canister until it snaps in place_

To remove: Lift hose latch tab upward and pull up on hose.

Handle

Button

Handle

Quick

Release _

(Some _

Hose

Latch

Tab

Notch__

2. Insert han- dle into wand until lock but-

ton snaps in

place Be sure hose is

not twisted.

==

'=' To remove:

_Press handle

r-] v

quick release button and

To store: Disconnect hose from wands and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed.

CoverElectronic

Bag/Hose

Chock

Storage

Hose

Latch Tab

Hood

Release

Dust Bag