z
Handi.Mate Jr.(
Combination
Tool
Wand
Identifyeach of the attachments shown above.
Remove the upper end of the hose that is attached to the wand holder by grasping the hose collar, twisting and pulling straight out. The attachments can now be added to the hose.
Note: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow by the attachments themselves or by new carpet lint filling the dust bin quickly. See the
TROUBLESHOOTING table.
Note: When using attachments make sure the vacuum cleaner is in the upright position and the Carpet] Bare Floor selec- tor is in the BARE FLOOR position.
To achieve maximum reach with the attach- ments, add the crevice tool to the end of the wand by inserting and twisting slightly.
When using attachments, be careful not to overextend the stretch hose
when reaching. Trying to reach beyond the hose stretch
could cause the vacuum cleaner to tip over.
For operation of Handi-Mate
Jr.® sea separate owne | _ | |
manual |
|
|
TO STORE ATTACHMENTS
Remove combination brush from wand or hose. Snap into appropdato storage location.
Remove crevice tool from the wand by twist- ing. Place in end of wand.
Reattach the extension hose to the wand
holder and place wand in slot on front of wand holder.
Reinsert Handi-
Mate Jr.® into
the vacuum cleaner as shown then close the Handi-
Mate Jr.® stor-
age cover.
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply
before servicing or cleaning the unit. Failure to do so could result
in electrical shock or personal Injury from vacuum cleaner sud- denly starting.
CAUTION
Attachments used in dirty areas, such as under refrigerator, should not be used on other surfaces until
they are washed.They could leave marks.
