_ | IPlease pay special attention to these hazard | alert boxes, and follow any instructionsI |
| Igiven. WARNING statements alert you to such dangers as tire, electric shock, burns I | |
| land personal injury. CAUTION statements alert you to such dangers as personalI | |
| linjuryand/or property damage. | I |
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup- ply until the assembly is complete. Failure to do so could result in elec- trical shock or injury.
Before assembling the vacuum cleaner, check the PACKING LIST on the cover of
the separate Repair Parts List. Use this list to verify that you have received all the
components of your new Kenmore vacu- um cleaner.
Do not overtighten.
Overtightening could strip the screw holes.
Do not operate the vacuum cleaner without the screws in place.
CORD ASSEMBLY
Make sure the quick release upper cord hook is in the upright position. Remove the wire tie from the power cord.
Remove tape from dust bin release handle.
HANDLE ASSEMBLY
Remove the two (2) handle screws located
in the body.
Handle
Lock the power cord into the locking notch base by pressing it into the
quick release upper cord hook as shown.
This helps keep the
power cord out from under the vacuum
cleaner agitator.
Power I_
C 7AI
Screw
Note: Do Not
Remove Tape
Quick Release
PowerHook
Lower
Hook
Position the handle as shown in the illustra- tion below.
When installing the handle, firmly press the handle onto the body. Secure with handle screws provided.
Wrap the power cord around the upper and lower cord hooks and lock the power cord plug onto the power cord.
5
