EXTENSION HOSE ASSEMBLY
t.Connect extension hose to the wand holder by twisting and pushing down over the wand holder to assure a good connection,
2.Connect the extension hose by align- ing the =J" slot with raised tabs. Push downward and rotate clockwise to lock in place.
For use of extension wand and hose see | HoMer |
ATTACHMENTS section. | Tab |
|
Remove the
Storage Cover
OPERATING INSTRUCTIONS
1. Turn the quick
release upper cord hook to either side
and down to
release the power cord.
2.Release the power cord plug from the power cord and pull the cord off the quick release upper cord hook. Be sure the power cord is still locked into the locking notch on the upper cord hook.
3.Plug the polarized power cord into a 120 Volt outlet located near the floor.
4.To replace cord, turn upper hook counter- clockwise pointing up, then wrap cord.
To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug, (one blade is wider than the
other.)6
This plug will fit in a polarized out- let only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified technician to install the proper outlet. Do not change the plug in any way.
Personal Injury and Product Damage Hazard
•DO NOT plug in if switch is in the ON position. Personal injury or dam- age could result.
•DO NOT use outlets above coun- ters. Damage from cord to items in surrounding area could occur.
