!WARNING

Never lean over the grill cooking area while lighting your gas grill. Keep your face and body a safe distance (at least 18 inches) from the cooking grid surface when lighting your grill by match.

Manually Lighting Your Grill by Match

1.Take the manual lighting stick

2.Insert a match into the lighting stick.

3.Follow steps 1 through 5 of the Basic Lighting Procedure.

4.Light the match and extend the lighting stick to cooking grid surface.

5.Turn the desired control knob to the HI/position setting to release gas. The burner should light immediately.

!WARNING

Should a “FLASH-BACK” fire occur in/or around the burner tubes, follow the instructions below. Failure to comply with these instructions could result in a fire or explosion that could cause serious bodily injury, death, or property damage.

•Shut off gas supply to the gas grill.

•Turn the control knobs to OFF position.

•Put out any flame with a proper fire extinguisher.

•Open grill lid.

•Once the grill has cooled down, clean the burner tubes and burners according to the cleaning instructions found on page 14~15.

If Grill Still Fails To Light

1.Check gas supply and connections for leaks. Check that all wire connections are secure.

2.Repeat basic lighting procedure. If your grill still fails to operate, turn the gas off at source, turn the control knobs to OFF, then check the following:

•Misalignment of burner tubes over orifices Correction: Reposition burner tubes over orifices. •Obstruction in gas line

Correction: Remove fuel line from grill. Do not smoke! Open gas supply for 1 second to clear any obstruction from fuel line. Close off gas supply at source and reconnect fuel line to grill.

•Plugged orifice

Correction: Remove burners from grill, carefully lift each burner up and away from gas valve orifice. Remove the orifice from gas valve and gently clear any obstruction with a fine wire. Then reinstall all orifices, burners, and cooking components.

If an obstruction is suspected in gas valves, please call for repair service at 1-800-4-MY-HOME.

4.If the grill still does not light you may need to purge air from the gas line or reset the regulator excess gas flow device. Note: This procedure should be done every time a new LP gas tank is connected to your grill.

To purge air from your gas line and/or reset the regulator excess gas flow device:

•Turn the control knob to OFF position.

•Turn off the gas at the tank valve.

•Disconnect regulator from LP gas tank.

•Let unit stand for 5 minutes.

•Reconnect regulator to the LP gas tank.

•Turn the tank valve on slowly until ¼ to ½ open.

•Open the grill lid.

•Set control knobs to OFF. Push and turn any control knob to HIGH.

•Turn control knobs to HIGH until all the burners are lit

•You may start to use the grill

5.If all checks or corrections have been made and you still have questions about operating your gas grill, call the Customer Service Helpline 8am – 5pm EST,

Monday through Friday at 1-800-913-8999

13

Page 12 Page 14
Page 13
Image 13
Kenmore 122.16118 Manually Lighting Your Grill by Match, If Grill Still Fails To Light, Monday through Friday at
Page 12 Page 14

122.16118 specifications

The Kenmore 122.16118 is an exemplary appliance in the realm of home heating solutions, particularly noted for its efficiency and design. This model is specifically designed for individuals who prioritize both functionality and aesthetics in their home environment. The 122.16118 is primarily an electric wall heater that promises to deliver consistent warmth in various settings, whether used in a residential or commercial context.

One of the standout features of the Kenmore 122.16118 is its compact design, which allows it to fit seamlessly into any room without taking up excessive space. This makes it a fitting choice for smaller apartments, studios, or even larger living areas where significant heat output is needed without a bulky heater detracting from the overall decor. The sleek appearance is complemented by a neutral color palette, ensuring it blends well with most interiors.

In terms of technology, the Kenmore 122.16118 utilizes advanced heating elements that provide efficient thermal output. The built-in thermostat ensures precise temperature control, allowing users to set their desired level of warmth with ease. This not only contributes to comfort but also enhances energy efficiency, as the system can maintain a consistent temperature without excessive energy consumption. Furthermore, some models feature programmable settings, allowing users to schedule heating times, adding another layer of convenience.

Safety is also a key consideration with the Kenmore 122.16118. It comes equipped with automatic shut-off features that prevent overheating, providing peace of mind for users, particularly in households with children or pets. Additionally, the surface materials are designed to minimize burn risk, an essential characteristic for any home heating appliance.

The installation process for the Kenmore 122.16118 is straightforward, with guidelines provided to ensure seamless setup on any wall. It can be hardwired into the existing electrical system, providing a clean look without visible cords or connections.

Overall, the Kenmore 122.16118 combines stylish design, advanced heating technology, and essential safety features, making it a reliable choice for anyone in need of effective heating solutions in their home or workspace. Whether it’s enhancing warmth during cold seasons or creating a comfortable atmosphere in any room, this model has proven to be a valuable addition to modern heating systems.
Top Page Image Contents