Installing Grill Head
1. Be sure grill cart doors are closed to stabilize cart.
Remove grill head from carton. Place onto cart from Figure 8 above as shown in Figure 6.
CAUTION: Grill head is heavy. To avoid injury, obtain the help of an assistant for this step. Also, make sure doors remain closed when placing grill head onto cart. DO NOT open doors until grill head is securely mounted to cart.
2.Align screw holes of grill head with screw holes of cart.
3.From back of cart, attach the grill head to the left and right side (Fig. 7A) panels using (4) 1/4 x 3/8" Phillips head screws and (4) 1/4" lock washers.
4.From the front of the cart, attach the front of the grill head to the left and right side panels (Fig. 7B) using (2) 1/4 x 3/8" Phillips head screws and (2) 1/4" lock washers
Installing Side Burner & Side Shelf
Figure 9
1.Assemble side shelf & side burner front panel using
(4) 5/32 x 3/8" Phillips head screws with (4) 5/32" lock washers. (Fig. 8)
2.Remove (1) preinstalled 5/32 x 3/8 Phillips head screw and (1) 5/32 lock washer from control panel. See Figure 9 inset.
3.Screw (2) 1/4 x 1/2" Phillips head screws and (2) 1/4" lock washers into side of grill head as shown. Do not screw in fully; leave 1/4" extended for shelf assembly. (Fig. 9)
4.Through side burner shelf screw holes, hang side burner on two screws. (Fig. 10)
Figure 6
Figure 10
A
Figure 7
/
/
</
9
