Heat Resistant Washers

Step 13

Mount the door handle with two

M4 X 25 mm bolts and two heat resistant washers. Insert each bolt through the door from the inside. From the outside place a heat resistant washer over each bolt. Then thread the bolts into the handle. Tighten each bolt securely.

Step 14

Insert the temperature gauge with bezel through the mounting hole in the front of the door. Place a wing nut onto the temperature gauge stem from the inside of the door panel and tighten it firmly.

11

Page 11
Image 11
Kenmore 125.15884801 owner manual Heat Resistant Washers