Step 4
Set the burner assembly onto the cabinet as shown.
CAUTION: Make sure the valve gas orifice slides and fits into the burner tube.
Step 5
Secure the burner assembly with the three M6 X 16 mm bolts with #10 washers and gaskets from the inside of the cabinet. Securely tighten the bolts.
Step 6
Attach the loose igniter wire to the igniter on the control panel as shown.
Note: With the help of a friend, turn the
smoker body to its upright position.
Burner Tube
Gas Valve
Orifice
#10 Washers
Gaskets
Burner Tube
Igniter
Gas Valve
Orifice
8
