Step 7
Set the smoke stack on top of the cabinet and line it up with the matching holes. Insert three M5 X 16 mm bolts through smoke stack base and into cabinet. Secure with three M5 mm nuts.
Step 8
Line up the side handle with the matching holes on each side of the cabinet as shown. The handles must be positioned upright with the bolt holes on the bottom as shown. Insert two M5 X 16 mm bolts and gaskets from the outside and thread into the holes in the side of the cabinet as illustrated. Tighten securely. Complete steps for both sides of the cabinet assembly.
Step 9
Insert the wood chip box rack into the bottom of the smoker. The feet of the rack sit in the four indentations in the bottom.
Step 10
Set the wood chip box onto the rack. Make sure it is seated properly and securely in the center of the rack. Place the lid on the wood chip box.
9
