Kenmore 141.16223 owner manual Pattern Head Screw 1/4x2-3/4

HNOTE: Before attaching the Cart Bottom Shelf to Cart be sure tank hole on the Bottom is located on the right side.

Install the Cart Bottom Shelf between the Cart Legs. Align the holes on Cart Legs with the threaded holes at the corners of Cart Bottom Shelf. Attach loosely the 8 screws then tighten screws.

D

Pattern Head Screw 1/4"x2-3/4"

Qty. 8

Ref. # S135G04332

1.Screw the 2 Casters into the Caster Seats. Turn the threaded Caster Stem by hand, clockwise until it stops. Tighten securely using the Customized Wrench provided.

2.Install the 2 Wheels to the Cart Legs-Wheel Side, by inserting the wheel bolt through the wheel and axle hole on the cart leg. Put spring washer and 3/8" nut onto bolt and tighten securely using the Customized Wrench provided. Do not overtighten or wheel will not turn freely. Snap Wheel Hub Caps onto wheels.

Wheel Bolt 3/8"x3-3/8"

Qty. 2

Ref. # $211G06352

Spring Washer

Qty. 2

Ref. # $431M08152

Nut 3/8"

Qty. 2

Ref. # $313G06082

Wrench/NO.17 Customized
Qty.	1	11
Ref.	# P05515101L