_r_ Installing Side Burner Kit
1. Attach the Side Burner Gas Valve Assembly to the Side Burner Gas Valve Hole on the Side Burner
Frame. See _ Align the 2 holes on the Side Burner Frame with the threaded holes on the Side Burner Gas Valve Bracket. Tighten securely using 2 screws and washers provided.
2.Cut Fastening Band from Pot Support and set Pot support aside. Install the Side Burner through the top hole in Side Burner Frame and onto the Side Burner Gas Valve. Make sure that opening at end of Side Burner Connection Tube goes over tip of Side Burner Gas Valve. Secure Side Burner with supplied Cotter Pin. See
3.Install the Control Knob to the Side Burner Gas Valve Stem. See m
4.Connect the Electric Wire terminal from Side Burner with the other from Grill Head. See
Bind the connected Electric Wires and Side Bumer Connection Tube together using the supplied Fastening Band.
5.The gap between the Side Burner Electrode Tip and the Side Burner Port should be approximately
6.Place the Side Burner Pot Support into the Side Burner Frame. See W
7.Place the Side Burner Wind Shield on the Side Burner Frame. See _Ji:l
Pattern Head Screw M4x8mm
Qty. 2
Ref. # S132MO4082
Plain Washer M4
Qty. 2
Ref. # S411M04122
\
Control Knob
Qty. 1
Ref. # P03426061C
Cotter | Pin |
Qty. | 1 |
Ref. | # P05501010B |
llra.-"l
SIDE | 1/ _I_3/ | BURNER |
ELEC-
TRODE
BURNEI__
•When you have finished assembling your grill we
strongly urge that all Pat- tern Head Thumb Screws be tightened, either with the supplied Tightening Tool or a #2 Phillips Head Screwdriver
Fastening Band
Qty. 1
Ref. # P055340011
Be sure the Electric Wire and Regulator Hose are bound together and fixed to the
hole on the top of Right Cart Side Panel. 14
