CAUTION: While it is possible for one person to assemble this grill, obtain assistance from another person when

handling some of the larger, heavier pieces, especially the grill head.

1.During unpacking and assembly always wear work gloves and eye protection.

2.Open Lid of shipping carton and remove top sheet of cardboard. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.

3.Remove packing materials and cart parts from shipping carton.

4.You may slice the carton front corners with a utility knife to lay open the carton front panel. This will allow you to raise the grill head Lid and remove the components packed inside the head, making it easier to lift.

5.With an assistant, lift the grill head out of the shipping carton and place it on the cardboard work surface.

6.Use the parts list to check that all parts have been included.

7.Inspect the grill for damage as you assemble it. Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box, or you have questions during the assembly process, call the:

Grill Information Center 1-888-317-7642 8am - 8pm CST, Monday through Friday

m Assembling The Cart To The Grill Head

1.Lay the Grill Head flat on its back as shown. SeemL'Zlll Tighten securely using 2 screws

Unfold the 2 pre-assembled Right Cart Legs. provided.

2.Unfold the 2 pre-assembled Left Cart Legs as shown. Pull down the 2 Left Cart Legs.

See m Align the holes on the Left Bowl Support Bracket with the threaded holes on Left Cart Leg. See I[_r"_lTighten securely using 4 screws provided.

Pattern Head Screw 1/4"xl/2"

Qty. 6

Ref. # $132G04082

\

10

Page 10
Image 10
Kenmore 141.16223 owner manual Pattern Head Screw 1/4xl/2 Qty Ref. # $132G04082