CHANGING THE PRESSER FOOT

The various attachment feet available for certain kinds of work are to be fastened to the presser bar

To attach the foot, raise the presser bar to its highest position by raising

the presser foot lever Loosen the presser foot thumb screw, choose the proper foot, insert from the front Tighten the screw using the large screw driver and make sure that the foot is secure

TURNING A CORNER

Stop sewing machine with needle Lower presser foot and continue

in fabric, Raise presser foot Turn fabric stitching

FASTENING A SEAM

Be sure both threads are drawn back under the presser foot Lower needle

into fabric about ½ inch from beginning of seam Push stitch length

control lever up for reverse stitching Stitch in reverse until needle reaches

beginning of seam

Move stitch length control lever _lown for forward stitching and complete seam When you reach the end, raise the stitch length control lever and sew back over _ inch of completed seam

 

FEED DOG

CONTROL

 

 

The feed dog controi ]<nob is situated on the right front of

 

 

machine bedplateo When knob is turned to the other side

 

 

of "U" mark, feed dog drops and does not pull material

 

 

This allows the operator freedom of movement of material,

 

 

as for darning, For regular sewing, turn knob to the "U"

 

 

mark (Feed dog

up)

15

Models 151, t52, 1649

Model 150

 

 

 

Page 15
Image 15
Kenmore 15/I649 manual Changing the Presser Foot, Turning a Corner, Fastening a Seam, Feed DOG