FIGURE 19.

5. Remove insulation to expose the terminal cover.

FIGURE 20.

6.Lift out the tab as shown to unclip the terminal cover from the thermostat. The terminal cover can now be removed from the thermostat.

FIGURE 21.

7.Disconnect the two wires on the element and unscrew the old element from the tank.

FIGURE 22.

8.Clean the area around the element opening. Remove any sediment from or around the element opening, inside the tank.

9.If you are cleaning the element you have removed, do so by scraping or soaking in vinegar or a de-liming solution.

Replacement elements must (1) be the same voltage and (2) no greater wattage than listed on the model rating plate affixed to the water heater.

10.A new gasket should be used in all cases to prevent a possible water leak. (See Element Gasket in the “Parts Order List ” Chart). Place the new element gasket on the thread side of the cleaned or new element and screw into tank, securing tightly using an element wrench.

FIGURE 23.

11.Close the water heater drain valve by turning the handle to the right (clockwise).

12.Open the cold water supply valve to the water heater.

NOTE: The cold water supply valve must be left open when the water heater is in use.

13.To insure complete filling of the tank, allow air to exit by opening the nearest hot water faucet. Allow water to run until a constant flow is obtained. This will let air out of the water heater and the piping.

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating element, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” power.

14.Check element for water leaks. If leakage occurs, tighten element or repeat steps 2 and 3, remove element and reposition gasket. Then repeat steps 10 through 14.

15.Reconnect the two wires to the element and then check to make sure the thermostat remains firmly against the surface of the tank.

16

Page 15 Page 17
Page 16
Image 16
Kenmore 153.31604 owner manual
Page 15 Page 17

153.31604 specifications

The Kenmore 153.31604 is a versatile and efficient dehumidifier designed for residential use, making it an ideal solution for those seeking to maintain a comfortable indoor environment. With a sleek and compact body, this appliance integrates seamlessly into various spaces, from basements to living rooms, delivering exceptional performance without being an eyesore.

One of the main features of the Kenmore 153.31604 is its impressive moisture removal capacity. It can efficiently extract up to 50 pints of moisture from the air per day, making it particularly effective for areas that experience high humidity levels. This capability allows homeowners to combat mold, mildew, and allergens, promoting a healthier living environment.

Equipped with advanced technologies, the Kenmore 153.31604 boasts an adjustable humidistat that provides optimal humidity control. Users can set their desired humidity level, and the dehumidifier will automatically cycle on and off to maintain that setting, ensuring energy efficiency. This feature not only saves electricity but also prolongs the appliance's lifespan.

The Kenmore 153.31604 also features a continuous drainage option. For convenience, this allows users to connect a garden hose to the unit, enabling continuous water drainage without the need to frequently empty the water bucket. The 1.8-gallon removable water tank is user-friendly as well, designed with a transparent window so users can easily monitor water levels. An overflow protection system is in place to prevent spills, adding to the appliance’s ease of use.

Noise levels can be a concern with many household appliances, but the Kenmore 153.31604 operates quietly, making it suitable for use in bedrooms and other quiet spaces. The lightweight design enhances portability, allowing users to move the unit from room to room as needed.

In terms of energy efficiency, the Kenmore 153.31604 is Energy Star certified, ensuring that it meets specific energy efficiency guidelines set by the EPA. This certification helps users save on energy bills while reducing their environmental impact.

Overall, the Kenmore 153.31604 combines functionality, technology, and user-friendly features, making it a top choice for anyone looking to control indoor humidity effectively. Its robust performance, efficient operation, and thoughtful design make it a valuable addition to any home.
Top Page Image Contents