Installation Instructions (cont'd)
Converting the Lower
Element (cont'd)
9. Replace | terminal | cover on | thermostat | making sure that the | 12. Complete | wiring | to the | water | heater, | or if completed, | turn | |
locking | tabs on | the terminal | cover are | in place. | "ON" | electric | power to | the | water | heater after filling | the | |
|
|
|
|
| tank | with | water. |
|
|
|
|
|
_,WARNING
Make sure the thermostat is flush against the tank, the terminal cover is in place, and the insulation is replaced.
Failure to do so can result in DEATH, SERIOUS BODILY INJURY,OR PROPERTY DAMAGE.
10.Replace the insulation block so that it completely covers the thermostat and element.
A CAUTION
Never use this water heater unlessit is completely full of water. To prevent damage to the tank and heating ele- ment, the tank must be filled with water. Water must flow from the hot water faucet before turning "ON" power.
11. Replace the access panel.
12
