Installation Instructions

Removing the Old Water Heater

4.	Attach a hose to the water heater
	drain valve and put the other end
	in a ﬂoor drain or outdoors. (See
	Figures 2 and 5.) Open the water

MANUAL GAS SHUT-OFF VALVE

GROUND

JOINT

UNION

CHECK WITH

LOCAL UTILITY

DISCHARGE PIPE (DO NOT CAP

heater drain valve. The water

passing out of the drain valve

may be extremely hot. To avoid

being scalded, make sure all

connections are tight and that the

water ﬂow is directed away from

any person.

FIGURE 5.

5.	Disconnect the vent pipe from the draft hood where it connects

FOR MINIMUM HEIGHT

3” MINIMUM

DRIP LEG

SUITABLE DRAIN

OR PLUG)

6” MAXIMUM AIR GAP

	to the water heater. In most installations the vent pipe can
	be lifted off after any screw or other attached devices are
	removed. Dispose of the draft hood. The new water heater
	has a draft hood which must be used for proper operation.
6.	If you have copper piping to the water heater, the two copper
	water pipes can be cut with a hacksaw approximately four
	inches away from where they connect to the water heater.
	See Figure 6. This will avoid cutting off pipes too short.

FIGURE 2.

1.Turn “OFF” the gas supply to the water heater.

If the main gas line shutoff valve serving all gas appliances is used,

also shut “OFF” the gas at each appliance. Leave all gas appliances shut “OFF” until the water heater

installation is completed. See FIGURE 3. Figures 2 and 3.

2.	Open a nearby hot water faucet
2.	Open a nearby hot water faucet
	until the water is no longer hot.
	When the water has cooled, turn
	“OFF”thewatersupplytothewater
	heater at the water shut off valve
	or water meter. Some installations
	require that the water be turned off	FIGURE 4.
	to the entire house. See Figures 2	FIGURE 4.
	to the entire house. See Figures 2
	and 4.

3.Check again to make sure the gas supply is “OFF” to the water heater. Then disconnect the gas supply connection from the gas control valve.

Additional cuts can be made later if necessary. Disconnect the

temperature-pressure relief valve drain line. When the water

heater is drained, disconnect the hose from the drain valve.

Close the drain valve. The water heater is now completely

disconnected and ready to be removed.

FIGURE 6.

If you have galvanized pipes to the water heater, loosen the two galvanized pipes with a pipe wrench at the union in each line. Also disconnect the piping remaining to the water heater. See Figure 7. These pieces should be saved since they may be needed when reconnecting the new water heater. Disconnect the temperature-pressure relief valve drain line. When the water heater is drained, disconnect the hose from the drain valve. Close the drain valve. The water heater is now completely disconnected and ready to be removed. Mineral buildup or sediment may have accumulated in the old water heater. This causes the water heater to be much heavier than normal and this residue, if spilled out, could cause staining.

FIGURE 7.

153.332.410 specifications

The Kenmore 153.332.410 is a versatile and efficient appliance that has gained popularity among homeowners looking for both functionality and reliability. This model exemplifies the high standards that Kenmore is known for, contributing to a seamless laundry experience.

One of the standout features of the Kenmore 153.332.410 is its user-friendly design. The intuitive control panel makes it easy for users to select appropriate settings for a variety of fabrics and loads. With multiple wash cycles available, including delicate, normal, and heavy-duty, the appliance caters to a range of laundry needs, ensuring your clothes are treated with care.

Another key characteristic is the capacity of the drum. The generous space allows users to wash larger loads in one go, saving time and energy. This is particularly beneficial for families or individuals with substantial laundry needs, as it minimizes the number of cycles needed, making laundry days far more efficient.

In terms of technology, the Kenmore 153.332.410 incorporates advanced washing capabilities, including a powerful agitation system that ensures thorough cleaning. The appliance effectively removes tough stains while being gentle enough for delicate items. Additionally, it features a high-efficiency design that reduces water and energy consumption without compromising performance.

The steam cleaning feature is noteworthy, as it not only helps in removing stubborn stains but also reduces wrinkles in garments, making ironing less of a chore. This technology is favored by many users, as it simplifies post-laundry tasks. Noise reduction technology also adds to the appliance's appeal, allowing it to operate quietly in the background, which is particularly valuable for apartments or homes where laundry is done overnight.

Durability is another aspect where the Kenmore 153.332.410 excels. Built with high-quality materials, this model is designed to withstand the rigors of frequent use. Its robust construction provides peace of mind that the appliance will deliver performance for years to come.

In conclusion, the Kenmore 153.332.410 stands out in the competitive landscape of laundry appliances. With its user-friendly features, advanced technology, generous capacity, and durability, it offers a comprehensive solution for all laundry needs, making it a worthy investment for any household.

Kenmore 153.332.410 manual Installation Instructions, Removing the Old Water Heater

Models: 153.332.410