Installation Instructions
14INSTALL GRILLE BASE WRAP
•Open doors fully. Open the grille panel.
•Install the unified double width grille base wrap (E) by slipping the notched ends over the door hinges.
•Install one screw (I) on each end and 2 at the center.
Unified Grille Base Wrap
Place Trim
Over Hinges
15 CONNECT WATER SUPPLY
Connect both refrigerators to the water supply.
•Locate and bring tubing to the front of the cabinet.
•Turn the water on to flush debris from line. Run about a quart of water through tubing into a bucket, then shut off water.
House |
| Refrigerator |
Water Supply |
| Water Supply |
|
|
|
Copper Tubing:
•Slip a 1/4″ nut and ferrule (provided) over both ends of the copper tubing. Insert tube into the union fitting on the unit and tighten nut to union.
•Turn on the water to check for leaks.
GE SmartConnect™ Tubing:
•Insert the molded end of the tubing into the refrigerator connection. Tighten the compression nut until it is just hand tight.
•Tighten one additional turn with a wrench. Overtightening can cause leaks!
•Turn on the water to check for leaks.
NOTE: Make sure excess tubing length does not interfere with drawer closing or toekick installation.
17
