GE ZICP720 Level the Refrigerators, Bracket, Place a level inside the machine for each unit

Installation Instructions

7	LEVEL THE REFRIGERATORS	• When refrigerators are level, tighten screws against the
		bracket.

Place a level inside the machine for each unit.

Both refrigerators MUST BE LEVEL AND PLUMB with each other and with adjacent cabinetry on each side.

Drawers should be evenly aligned.

Both refrigerators have 4-point leveling. The front is supported by leveling legs, the rear is supported by adjustable wheels. Both are accessible from the front of the refrigerator.

•To level the back of the refrigerator, turn the 7/16″ hex nut located above the front wheels. Turn clockwise to raise or counterclockwise to lower the refrigerator.

•For front leveling, use a 1-1/4″open-end wrench.

•Adjust height of refrigerator to match installation cutout opening 83-1/2″to 84-1/2″. The refrigerator should be level and plumb with cabinetry.

Hex Nut Adjusts

Rear Wheels

Leveling

Leg

Tighten bracket

screws

CAUTION:

The rear leveling wheels and front leveling legs are limited to a maximum height adjustment of 1″. If the installation requires more than 84-1/2″height, the installer should elevate the refrigerator on a sheet of plywood or runners. Cabinetry trim could also be added across the top of the opening to shorten the opening. If you attempt to raise the refrigerator more than 1″, you will damage the front leveling legs and the rear leveling wheels.

PRUDENCE :

Les roues de nivellement arrière et les pattes de nivellement avant permettent un réglage maximal de

25 mm (1 po). Si l’ouverture pour le réfrigérateur a une hauteur supérieure à 2,15 m (84-1/2 po), l’installateur doit élever le réfrigérateur sur une feuille de contre-plaqué ou des glissières. Il est également possible d’ajouter des baguettes de finition des placards sur le haut de l’ouverture afin de

la réduire. Lever le réfrigérateur de plus de 25 mm (1 po) endommage les pattes de nivellement avant et les roues de nivellement arrière.

11