GE ZICP720 Install Center Trim Strip, Adjust Door Swing, Installation Instructions

Installation Instructions

11INSTALL CENTER TRIM STRIP

•Open doors fully.

•The case trims should be evenly aligned top to bottom with a slight gap between them.

•Starting at the top, press center trim strip (D) over the inside case trims of both refrigerators.

•Continue pressing trim until you reach the bottom of the case trims. The trim should align with the top and bottom of case trims.

Case Trim

U-Shape

Trim

12 ADJUST DOOR SWING

NOTE: This refrigerator has a 2-position door stop. When space does not allow the door to swing open fully to 130°, you may change the door swing to a 90° opening. Skip this step if door opening is satisfactory for your installation situation.

•Lift the grille panel to access the door stop.

•Use pliers to unscrew door stop and reinstall into the 90° position.

Pin Location

For 90°

Door Swing

Pin Location

as Shipped

For 130°

Door Swing

13