Installation Instructions
16CONNECT POWER
•Check to be sure the power cord is plugged into the receptacle.
Raise |
Grille |
Panel |
Electrical | Master Light |
Outlet | Switch |
|
|
•Check to make sure power to refrigerator is on by opening refrigerator door to see if interior lights are on.
•The temperature controls are preset at 37°F
for the fresh food section and 0°F for the freezer.
•Allow 24 hours for temperature to stabilize before making adjustments.
17 START ICEMAKER
Power Switch
Feeler Arm
•Flip the switch to I (ON). The icemaker will begin operation automatically.
•Be sure nothing interferes with the sweep of the feeler arm.
•Discard the first full bucket of ice cubes.
•To turn the icemaker off, set the switch to O (OFF).
18INSTALL TOEKICK
•Install the toekick (G) with 4 screws (I) provided, one on each side and 2 in the center.
IMPORTANT: The toekick must be positioned with the vented slots on the top side. The vented toekick must remain unobstructed for proper air circulation and refrigerator operation.
18
