Housekeeping

Vacuum around base of water heater for dust, dirt, and lint on a regular basis.

Fire and Explosion Hazard

Do not obstruct combustion air openings at the bottom of the water heater.

Do not use or store flammable vapor products such as gasoline, solvents or adhesives in the same room or area near water heater or other appliance.

At least annually, check the base-ring filter and flame arrester for any dust, lint, or debris that may have accumulated. Clean as necessary.

Can cause serious injury or death.

AT LEAST ANNUALLY, A VISUAL INSPECTION SHOULD BE MADE OF THE BASE-RING FILTER AND FLAME ARRESTER. CLEAN IF LINT ACCUMULATIONS ARE NOTICED.

INSTALLED IN SUITABLE AREA: To ensure sufficient ventilation and combustion air supply, proper clearances from the water heater must be maintained. See “Installation Instructions.” Combustible materials such as clothing, cleaning materials, or flammable liquids, etc. must not be placed against or adjacent to the water heater because they could catch on fire.

Anode Rod Inspection

The anode rod is used to protect the tank from corrosion. Most hot water tanks are equipped with an anode rod. The submerged rod deteriorates to protect the tank. Instead of corroding the tank, water ions attack and eat away the anode rod. This does not affect the water’s taste or color. The rod must be maintained to keep the tank in operating condition.

FIGURE 29B.

Anode deterioration depends on water conductivity, not necessarily water condition. A corroded or pitted anode rod indicates high water conductivity and should be checked and/or replaced more often than an anode rod that appears to be intact. Replacement of a depleted anode rod can extend the life of your water heater. Inspection should be conducted by calling the Sears Service Center for an authorized contractor. At a minimum, the anode(s) should be checked annually after the warranty period.

Temperature-Pressure Relief Valve Operation

The temperature-pressure relief valve must be manually operated at least once a year.

Burn hazard

Hot water discharge.

Keep clear of relief valve discharge outlet.

When checking the temperature-pressure relief valve operation, make sure that (1) no one is in front of or around the outlet of the temperature-pressure relief valve discharge line, and (2) that the water discharge will not cause any property damage, as the water may be extremely hot. See Figure 30.

FIGURE 30.

If after manually operating the valve, it fails to completely reset and continues to release water, immediately close the manual gas shut-off valve and the cold water inlet valve and call the Sears Service Center.

If the temperature-pressure relief valve on the appliance weeps or discharges periodically, this may be due to thermal expansion. You may have a check valve installed in the water line or a water meter with a check valve. Consult the Sears Service Center for further information. Do not plug the temperature-pressure relief valve.

Draining and Flushing

It is recommended that the tank be drained and flushed every 6 months to remove sediment which may build up during

27

Page 26 Page 28
Page 27
Image 27
Kenmore 153.336472 Housekeeping, Anode Rod Inspection, Temperature-Pressure Relief Valve Operation, Draining and Flushing
Page 26 Page 28

153.336482, 153.336372, 153.336333, 153.336433, 153.336472 specifications

The Kenmore series 153.336433, 153.336382, 153.336472, 153.336333, and 153.336482 represents a collection of top-tier appliances engineered to enhance home convenience and efficiency. Each model in this lineup boasts unique features, technologies, and characteristics, catering to diverse consumer needs.

First, the aesthetic appeal of the Kenmore appliances is paramount. Available in various finishes, including sleek stainless steel and classic white, they blend seamlessly into any kitchen decor, adding a touch of sophistication. The ergonomic design allows for easy operation and maintenance, ensuring that each appliance serves not just as a tool, but as a design statement.

One of the standout features across the models is their energy efficiency. Equipped with advanced energy-saving technologies, these appliances significantly reduce electricity and water consumption without compromising performance. The Energy Star certification on many models means consumers can enjoy substantial savings on utility bills while contributing to environmental sustainability.

Another key characteristic is the innovation in cooking technology. Many models incorporate smart technology that enables remote control and monitoring via smartphone applications. Users can preheat ovens, adjust settings, and track cooking times from anywhere in the home, ensuring perfectly cooked meals with minimal hassle.

The series also includes versatile cooking settings that cater to various culinary styles. Features such as convection cooking, steam assist, and multi-cooking modes enable users to experiment with a wide range of recipes. The user-friendly interface makes it simple to select the desired cooking method, ensuring that even novice cooks can prepare gourmet dishes effortlessly.

Safety features are a priority in the Kenmore range, with options like automatic shut-off, child safety locks, and temperature controls designed to prevent accidents in the kitchen. These appliances are built with durability in mind, utilizing high-quality materials that promise longevity and reliability.

In summary, the Kenmore models 153.336433, 153.336382, 153.336472, 153.336333, and 153.336482 combine style, efficiency, and innovation to elevate everyday cooking experiences. With their standout features and commitment to quality, these appliances are set to remain a popular choice for homeowners seeking to enhance their culinary endeavors. Whether you're renovating your kitchen or simply upgrading existing appliances, the Kenmore series offers unmatched performance and reliability.
Top Page Image Contents