INSTALLATION INSTRUCTIONS

Removing the Old Water Heater

FIGURE 2.

1.Turn “OFF” the gas supply to the water heater.

If the main gas line Shut-off valve

 

serving all gas appliances is used,

 

also shut “OFF” the gas at each

 

appliance.

Leave all gas

 

appliances shut “OFF” until the

 

water heater

installation is

 

 

completed, see Figures 2 and 3.

FIGURE 3.

2. Turn “OFF” the water supply to the

 

 

water heater at the water shut off

 

valve or water meter. Some

 

installations require that the water

 

be turned off to the entire house,

 

see Figures 2 and 4.

 

FIGURE 4.

 

 

3.Check again to make sure the gas supply is “OFF” to the water heater. Then disconnect the gas supply connection from the gas control valve.

4.Attach a hose to the water heater drain valve and put the other end in a floor drain or outdoors. Open the water heater drain valve. Open a nearby hot water faucet which will relieve pressure in the water heater and speed draining. The water passing out of the drain valve may be extremely hot. To avoid being scalded, make sure all connections

are tight and that the water flow is

 

directed away from any person, see

FIGURE 5.

Figures 2 and 5.

5.Disconnect the vent pipe from the draft hood where it connects to the water heater. In most installations the vent pipe can be lifted off after any screw or other attached devices are removed. Dispose of the draft hood. The new water heater has a draft hood which must be used for proper operation.

6.If you have copper piping to the water heater, the two copper water pipes can be cut with a hacksaw approximately four inches away from where they connect to the water heater, see Figure 6. This will avoid cutting off pipes too short. Additional cuts can be made later if necessary. Disconnect the temperature-pressure relief valve drain line. When the water heater is drained, disconnect the hose from the drain valve. Close the drain valve. The water heater is now completely disconnected and ready to be removed.

FIGURE 6.

If you have galvanized pipes to the water heater, loosen the two galvanized pipes with a pipe wrench at the union in each line. Also disconnect the piping remaining to the water heater, see Figure 7. These pieces should be saved since they may be needed when reconnecting the new water heater. Disconnect the temperature-pressure relief valve drain line. When the water heater is drained, disconnect the hose from the drain valve. Close the drain valve. The water heater is now completely disconnected and ready to be removed. Mineral buildup or sediment may have accumulated in the old water heater. This causes the water heater to be much heavier than normal and this residue, if spilled out, could cause staining.

FIGURE 7.

8

Page 7 Page 9
Page 8
Image 8
Kenmore 153.338003, 153.338073 owner manual Installation Instructions, Removing the Old Water Heater
Page 7 Page 9

153.338003, 153.338073 specifications

The Kenmore 153.338003 and 153.338073 are highly regarded models in the realm of home appliances, particularly known for their innovative features and reliable performance. Designed to cater to the evolving needs of modern households, these appliances seamlessly blend functionality with practicality.

Both models are equipped with advanced technology that enhances their efficiency and user-friendliness. The Kenmore 153.338003 and 153.338073 are designed with a focus on energy efficiency, utilizing cutting-edge materials and designs to minimize power consumption while maximizing performance. This not only helps households save on energy bills but also contributes to a more sustainable environment, making these models a responsible choice for eco-conscious consumers.

Key features of these models include a robust heating system and adjustable temperature controls that cater to various cooking needs. Users can easily set their desired temperature, ensuring that the appliance can handle a wide range of tasks, from baking to broiling. The inclusion of multiple cooking settings allows for versatile meal preparations, making it easy to tackle everything from quick snacks to elaborate dinners.

Another standout characteristic is the spacious interior, which provides ample room for cooking larger dishes. The layout is thoughtfully designed to maximize space while ensuring that heat distribution is even across all cooking surfaces. This ensures that meals are cooked thoroughly and uniformly, eliminating the common issue of uneven cooking.

Cleaning and maintenance have also been prioritized in these models. The exterior surfaces are crafted from durable, easy-to-clean materials, while the interior features non-stick coatings that facilitate hassle-free cleaning. Additionally, features such as removable trays and racks allow for simplified upkeep, ensuring that the appliance remains in top condition over time.

User-friendly interfaces are another highlight, with intuitive controls that allow users of all skill levels to operate these appliances with ease. Digital displays provide clear information on cooking times and settings, enhancing the overall cooking experience.

In summary, the Kenmore 153.338003 and 153.338073 stand out in the market due to their effective features, advanced technologies, and practical characteristics. They represent a blend of innovation and convenience, making them an excellent addition to any modern kitchen.
Top Page Image Contents