Kenmore 175.869039 manual To Emptythesolution Tank, Upholsterynozzle, Floortools

TO EMPTYTHESOLUTION TANK

See Figure 1I

When cleaning is completed, both the Recovery Tank and the Solution Tank should be emptied prior to storage. Empty the Recovery Tank as described earlier. There are three methods

of emptying the Solution Tank.

Method 1:

1.Disconnect Short Cord from Recovery Tank.

2.Remove Recovery Tank from Solution Tank and pour

solution out of the Filler Opening.

Method 2:

1.Place Floor Nozzle in bath tub or container.

2.Depress Solution Release Trigger and spray until empty.

Method 3:

1.Remove Floor Nozzle and insert Wand into Solution Tank through the Filler Opening.

2.Vacuum solution out.

3.All solution is now in Recovery Tank. Empty Recovery Tank as described earlier.

,illllllLitJ

Jr METHOD 1

	/
METHOD 2	METHOD 3

UPHOLSTERYNOZZLE

See Figure 12

Cleanmore Carpet Cleaner Upholstery Nozzle is an attach- ment for furniture upholstery cleaning. The upholstery nozzle may also be used to dean auto upholstery or carpet-

ing. In addition, the nozzle may be used to clean carpeted stairs and other areas difficult to clean with the normal floor

nozzle.

FLOORTOOLS

See Figure i3

The Bare Floor/Carpet Brush (1) may be used on floors

without carpet for DRY cleaning with paper dust bag in- stalled.

The Squeegee Attacbanent (2) is useful for WET pickup.

CA UT/ON: D O NOT run the Pump Motor when using these attachments. To prevent Pump Motor from operating, make sure Pump Motor Switch is in "OFF" position, or unplug the Short Cord from the Solution Tank to the Recovery Tank.

® ®

%%