OPERATING INSTRUCTIONS
Note: After switching the unit on, the ventilator operates, but the compressor only starts after the control lamp has flashed for 3 minutes. Cooling effect may require a further 5 minutes. This is done as a protection mechanism to prolong compressor life. Further information is available in the “Troubleshooting” section.
AIR CONDITIONING MODE – IN ROOM OPERATION
We recommend starting your unit early in the morning on warm days for maximum effect.
This unit has a
The unit stands in the room to be cooled.
∙
∙Connect the exhaust hose and the air outlet grid to the unit as displayed in the illustration. The hose
must be connected on the side with the warm air icon 
. The warm extract air must be emitted from the room via the exhaust hose. Make sure that no warm outside air can enter the room. For effective cooling, we recommend our selection of various accessories which reduce or prevent entry of warm air into the room.
∙Set the function to “COOLING“. Set the target temperature using the temperature control. The target temperature can range between 17°C and 30°C (65°F and 90°F). The unit can only be used in an ambient temperature of maximum 32°C (92°F).
AIR CONDITIONING MODE – OUT OF ROOM OPERATION
The unit is outside the room to be cooled, such as adjacent room, hallway etc.
Connect the air hose and the air outlet grid to the unit as displayed in the illustration; hose must be
connected to the side with the COOL icon
. If the unit is placed out or room during high humidity periods, we recommend that a drainage hose for condensation water be connected to the bottom water outlet for effective cooling and additional moisture removal.
If the unit is working in conditions of high humidity it may display an E4 error code. See troubleshooting.
10
