Before assembling your vacuum cleaner, be sure you have all the parts shown in PARTS AND FEATURES.
TELESCOPIC WAND
Push the knob and pull out wand to required length.
Knob
CANISTER
1.Open the canister hood.
2.Check to see that the dust bin is properly installed. See CLEANING THE DUST BIN AND WASHABLE FILTER for instructions.
3.Check to see that the motor safety filter is
properly installed. See CLEANING MOTOR SAFETY FILTER for instructions.
Motor
Safty Filter_\
RUG/FLOOR | NOZZLE | Dust Bin__ |
1. Insertwand intorug/floor nozzle.
HOSE
Fitting Hook
2.Push floor selector switch back for bare floor and forward for carpet. Brushes should be down for bare floor and up for carpet.
Bare Floor | Carpet |
ATTACHMENTS
Clamp Accessory Holder around upper Pipe as shown.
1.Insert hose into canister until it snaps into place.
To remove hose : Press hose fitting hook and pull upwards.
2.Insert wand into handle by twisting slightly.
To remove handle : Pull up on handle by twisting slightly.
