Kenmore 3840JL2019A manual How To Remove And Install The Pullout Drawer, Removing Pullout Drawer

Models: 79575559400 3840JL2019A

1 35
Download 35 pages 44.15 Kb
Page 12
Image 12
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER

HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER

IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions.

1. Removing Pullout Drawer

Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system.

• Remove the screw (2) from each side of rail system.

Lift the top of door to unhook door supports from rail system. Lift door up to remove.

2. Installing Pullout Drawer

• Pull both rails (1) out to full extension.

Hook the door supports (2) into the rail tabs (3), as illustrated, and lower the door into final position. And tighten the screw (4).

With the drawer pulled out to full extension, insert the

lower basket (5) in the rail assembly until it doesn't move forward.

!

CAUTION: When you remove the drawer, do not hold handle. If it comes off, it could cause personal injury.

CAUTION: When laying down the drawer, be careful not to damage the floor or hurt your feet by the sharp edges on hinge side.

_i, WARNING: To prevent accidental child and pet entrapment or suffocation risk. DO NOT allow them to play inside of drawer.

WARNING: DO NOT step or sit down on Freezer Door.

12

Page 12
Image 12
Kenmore 3840JL2019A, 79575559400 manual How To Remove And Install The Pullout Drawer, Removing Pullout Drawer