Explosion Hazard
Use
Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freeler sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately.
GENERAL CLEANING TIPS
•Unplug refrigerator or disconnect power.
•Remove all removable parts, such as shelves, crispers, etc. Refer to sections in Using Your Refrigerator for removal instructions.
•Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners.
•Hand wash, rinse and dry all surfaces thoroughly.
•Plug in refrigerator or reconnect power.
OUTSIDE
Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth.
For products with a stainless steel exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth.
INSIDE WALLS (allow freezer to warm up so cloth won't stick)
To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so does it not scratch the surfaces of the refrigerator.
&CAUTION: While cleaning the inside, do not spray water.
DOOR LINERS AND GASKETS
Do not use cleaning waxes, concentrated detergents, bleaches, or cleaners containing petroleum on plastic refrigerator parts.
PLASTIC PARTS (covers and panels)
Do not use window sprays, abrasive cleansers, or flammable fluids. These can scratch or damage the material.
CONDENSER COILS
Remove base cover. (See the base cover section on page 13.) Use a vacuum cleaner with an extended attachment to clean condenser coils.
Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month.
Replace base cover.
LIGHT BULB REPLACEMENT
Electrical Shock Hazard
Before replacing a
NOTE: Moving the control to the OFF position does not remove power to the light circuit.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage.
To change Refrigerator Light Bulbs:
1.Unplug Refrigerator, or disconnect power at the circuit breaker.
2.If necessary, remove top shelf or shelves.
3.Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove rear tabs.
4.Make sure the bulbs are cool to the touch.
Turn bulbs counterclockwise to remove. Insert new bulb(s).
5.Assemble in reverse order by snapping the Lamp Cover in, engaging the rear tabs followed by the front tabs.
24
