Kenmore 385.11703 Threading Machine, Disconnect the AC adapter from the machine, Before threading

	Threading	the Machine
/	WARNING:
	Disconnect the AC adapter from the machine
	before threading°
	* Place a spool on the spool pin, with thread
	coming	off as shown,

* Raise the thread take-up lever to its highest position by turning the handwheeE counter- clockwise,

* Raise the presser foot

Draw the end of thread around under the thread guide,

(_ Thread guide

	While holding the thread with your right hand
	near the spool, use your left hand to draw
®	the end of the thread down along the right
	channel		and around the bottom of the guide
	plate,
	0	Guide	plate
	Firmly draw the thread up along the left
	channel
	Pass the thread through the eye of the take-up
	lever from right to left.
	(_ Take-up lever
	Draw the thread down along the left channel
	and pass it behind the needle bar thread
	guide from the left.
	(_ Needle bar thread guide
	Insert the threader loop through the needle
	eye from behind_
	Pass the thread end through the threader loop
	(_	Needle eye
	(_) Threader loop

Pull the threader loop out from the needle eye_ Remove the thread end from the threader loop.

'14