Appendices
Troubleshooting
Before you suspect a malfunction, please check the following points.
Power does not turn on
•  | Is the power cable connected to the outlet?  | p.10  | 
•  | Is the [POWER/VOLUME] knob turned on?  | p.12  | 
No sound
• Are the connected devices or headphones connected to
the correct jack(s)?  | p.10  | 
•Are the connected devices 
•Is the [POWER/VOLUME] knob set to a position where
sound will be output?  | p.12  | 
• Is the Global mode Page 3B: MIDI “Local” setting  | 
  | 
turned ON?  | p.54  | 
•Were any 
..................................................................................... p.38, 40
• Was the FILTER “Cutoff” set to 0?  | p.39  | 
•If a pedal is connected to the MS2000/MS2000R, is the pedal in a position for which no sound will be pro- duced?
Sound does not stop
•Is the Global mode Page 6A: PEDAL & SW “A.Switch” setting appropriate for the pedal switch that is connected? p.57
Can’t write programs or global settings
•Is Global mode Page 2A: MEMORY“Protect” turned OFF? p.30, 54
Transpose or velocity curve is not transmitted/ received correctly
•IsGlobalmodePage1C:Global“Position”setappropriately? p.53
Arpeggios do not start
•Is the arpeggiator turned on ([ON/OFF] key lit)?..... p.15
•Is Global mode Page 3C: MIDI “Clock” set to Internal?
........................................................................................... p.54
No response to MIDI messages sent from an external device
• Is the MIDI cable connected correctly?  | p.10  | 
•Does the MIDI channel of the data transmitted from the external MIDI device match the global MIDI channel of
the MS2000/MS2000R?  | p.11  | 
Does not respond correctly to MIDI messages sent from an external device
• Are the various parameters of Global mode Page 4:  | 
  | 
MIDI FILTER set to ENA?  | p.55  | 
Specifications and options
Tone generator system
Analog modeling synthesis system
•Synth programs
4 voices, 2 oscillators + noise generator, EG ⋅ 2, LFO ⋅ 2, virtual patch ⋅ 4, MOD sequence (maximum 16 steps ⋅ 3)
•Vocoder programs
4 voices, 1 oscillator + noise generator, EG ⋅ 2, LFO ⋅ 2
16 channel vocoder, adjustable level and pan for each channel, For- mant Shift function
Tone generator
• 4 voice, 2 oscillator + noise generator
Keyboard (MS2000)
• 44 notes (no aftertouch)
Effects
• Modulation effect (3 types), delay (3 types), equalizer
Arpeggiator
• 6 types
Programs
• 16 programs ⋅ 8 (total 128 programs)
Inputs
• AUDIO IN 1 jack  | 39 [kΩ]  | 
Input impedance  | |
Maximum input level  | |
  | Max)  | 
Source impedance  | 600 [Ω]  | 
•AUDIO IN 2 jack (with MIC/LINE switch) AUDIO IN 2 [LINE]
Input impedance  | 39 [kΩ]  | 
Maximum input level  | |
  | Max)  | 
Source impedance  | 600 [Ω]  | 
AUDIO IN 2 [MIC]  | 22 [kΩ]  | 
Input impedance  | |
Maximum input level  | |
  | Max)  | 
Source impedance  | 600 [Ω]  | 
Outputs
• L/MONO, R jacks  | 1.1 [kΩ] (MONO: 550Ω)  | |
Output impedance  | ||
Maximum output level  | +6.5 [dBu]  | |
Load impedance  | 100 [kΩ]  | |
• Headphone jack  | 
  | [Ω]  | 
Output impedance  | 10  | |
Maximum output level  | 35  | [mW]  | 
Load impedance  | 33  | [Ω]  | 
Control inputs
•ASSIGNABLE PEDAL jack
•ASSIGNABLE SW jack
MIDI
• IN, OUT, THRU connectors
Display
• 16 character (8 ⋅ 5 pixel) ⋅ 2 line LCD module (with backlight)
Power supply
• DC 9V, 8 W
Dimensions
•MS2000: 737.8 (W) ⋅ 371.3 (D) ⋅ 147.7 (H) mm
•MS2000R: 482.0 (W) ⋅ 233.2 (D) ⋅ 87.1 (H) mm 
Weight
•MS2000: 7.1 kg
•MS2000R: 2.8 kg
Included items
•AC adapter (DC9V)
•Washers ⋅4, Bushing ⋅4, Screws ⋅4 (MS2000R only)
Options
•
•
•
•
*Appearance and specifications of this product are subject to change without
notice.  | 73  | 
  |