Parameter Guide
3Use the [+/YES]
4Use CURSOR[®] to move the cursor to the copy source timbre.
5Use the [+/YES]
If the copy source program is Single, it will not be possi- ble to select the copy source timbre (only timbre 1 is available).
The LCD screen will show Page 26E: UTILITY “InitSeq.”
26E UTILITY
InitSeq OK?
2Press the [+/YES] key.
The LCD screen will show the sequence to be initialized (InitSeq).
26E UTILITY
SEQ1 OK?
Program parameters
6Use the CURSOR [®] key to move the cursor to “OK,” and press the [+/YES] key.
You will be asked to confirm the copy function.
26C UTILITY
Are You Sure OK?
7Press the [+/YES] key once again.
The copy operation will be completed, and the display will indicate “Completed.”
8Press the [EXIT] key.
You will return to the first screen of the “CopyTimbre” function.
D:SwapTimbre
This function swaps (exchanges) the settings of timbres 1 and 2 in the currently selected program.
The swap function cannot be performed for Single pro- grams.
Procedure
1In LCD Edit mode press the SELECT [16] key, and then press the CURSOR [®] key three times.
The LCD screen will show Page 26D: UTILITY “Swap- Timbre.”
26D UTILITY
SwapTimbre OK?
2Press the [+/YES] key.
You will be asked to confirm the swap function.
26D UTILITY
Are You Sure OK?
3Press the [+/YES] key once again.
The timbres will be swapped, and the display will indi- cate “Completed.”
4Press the [EXIT] key
You will return to the first screen of the “SwapTimbre” function.
E:InitSeq
This function initializes one or all sequences of the currently selected timbre.
InitSeq | [SEQ1...ALL] |
Select the sequence(s) that you wish to initialize.
When you initialize a sequence, the data recorded in that sequence will be erased.
Procedure
1In LCD Edit mode press the SELECT [16] key, and then press the CURSOR [®] key four times.
3Use the [+/YES]
If you select ALL, all sequences (SEQ
4Use CURSOR [®] to move the cursor to “OK,” and press the [+/YES] key.
You will be asked to confirm the initialize function.
26E UTILITY
Are You Sure OK?
5Press the [+/YES] key once again.
The sequence(s) will be initialized, and the display will indicate “Completed.”
6Press the [EXIT] key.
You will return to the first screen of the “InitSeq” func- tion.
F:CopySeq
This function copies sequence data from another timbre to the currently selected timbre.
Source Program | [A01...H16] | |
Select the copy source program. |
|
|
Source Timbre | [1, 2] | |
Select the copy source timbre. |
|
|
Source Seq | [S1... | S3] |
Select the copy source sequence. |
|
|
Destination Seq | [1... | 3] |
Select the copy destination sequence. |
|
|
Procedure
1In LCD Edit mode, press the SELECT [16] key and then press the CURSOR [®] key five times.
The LCD screen will show Page 26F: UTILITY “Copy- Seq.”
26F UTILITY
CopySeq OK?
2Press the [+/YES] key.
The LCD screen will indicate the copy source program (Source Program), timbre (Source Timbre), sequence (Source Seq), and copy destination sequence (Destina- tion Seq).
26F UTILITY
A01 T:1 S1”1 OK?
Source Program |
|
|
|
|
|
|
|
|
| Destination Seq |
|
|
|
|
|
|
|
|
| ||
Source |
| Timbre Source |
| Seq |
| |||||
47
