G: SyncCtrl | [OFF, CC#00...CC#95] |
Select the MIDI control change number that will be transmit- ted from the MIDI OUT connector when the arpeggiator sends a
If the specified number has been specified for another key or knob, an “*” will be displayed in the LCD screen beside “MIDI FILTER.”
H: TimbreSelect | [OFF, CC#00...CC#95] |
Here you can select the control change number that will be output from the MIDI OUT connector when a timbre is selected in Program Play mode or LCD Edit mode. (With the factory settings, this is CC#95.)
If the specified number has been specified for another key or knob, an “*” will be displayed in the LCD screen beside “MIDI FILTER.”
Page5: CTRL CHANGE
A: Ctrl Change
Here you can assign a MIDI control change number (CC#) to each front panel knob.
When you operate a knob or key in Program Play mode or LCD Edit mode, the assigned control change will be trans- mitted or received.
5A CTRL CHANGE
Portament :CC#05
knobCtrl#
Knob | [Portamento...Mod Depth] |
Select the knob or key. |
|
Ctrl# | [OFF, CC#00...CC#95] |
Select the MIDI control change number (CC#).
If the specified number has been specified for another key or knob, an “*” will be displayed in the LCD screen beside “CTRL CHANGE.”
Page6: PEDAL&SW
A: A.Pedal | [Volume...FootPdl] |
Select the function of the pedal that is connected to the ASSIGNABLE PEDAL jack. (With the factory settings, this is Exp Pdl.)
Volume
MIDI control change MIDI Volume (CC#07) will be assigned.
You can use a pedal to control the volume level of the pro- gram. This is used mainly as a
For a vocoder program, this controls the volume level of the internal tone generator of the carrier.
If the control change map (Page 5: CTRL CHANGE) Amp Level has been set to CC#07, this will control the volume level.
Exp Pdl
MIDI control change MIDI Expression (CC#11) will be assigned.
You can use a pedal to control the volume level. This is used mainly to add dynamic performance expression to the level. Pedal operations will also transmit [Bn, 0B, vv] (CC#11) messages from the MIDI IN connector.
Panpot
MIDI control change MIDI Panpot (CC#10) will be assigned.
You can use a pedal to control the panpot of the program. Pedal operations will also transmit [Bn, 0A, vv] (CC#10) messages from the MIDI IN connector.
For a vocoder program, this controls the volume level of the audio that is output directly from the AUDIO IN 2 jack (Direct Level).
If the control change map (Page 5: CTRL CHANGE) Panpot has been set to CC#10, this will control panpot (or Direct Level).
A.Touch
After Touch will be assigned. Operating the pedal will transmit Channel Pressure [Dn, vv] messages from the MIDI OUT connector. If the Global mode parameters Page 3D: MIDI “MIDI 1” or Page 3E: MIDI “MIDI 2” are set to A.Touch, this can be used as a modulation source.
BreathC
MIDI control change MIDI Breath Control (CC#02) will be assigned.
Operating the pedal will transmit [Bn, 02, vv] messages from the MIDI OUT connector.
If the Global mode parameters Page 3D: MIDI “MIDI 1” or
Page 3E: MIDI “MIDI 2” are set to CC#02, this can be used as a modulation source.
FootPdl
MIDI control change Foot Pedal (CC#04) will be assigned. Operating the pedal will transmit [Bn, 04, vv] messages from the MIDI OUT connector.
If the Global mode parameters Page 3D: MIDI “MIDI 1” or
Page 3E: MIDI “MIDI 2” are set to CC#04, this can be used as a modulation source.
B: A.SwFunc | [Damper...Arpegio] |
Select the function of the pedal switch connected to the ASSIGNABLE SWITCH jack. (With the factory settings, this is Damper.)
Damper
The pedal switch will function as a damper pedal.
Prog +/–
The pedal switch will select programs consecutively.
Oct +/–
The pedal switch will switch octaves.
This lets you use the pedal to perform the functions of the front panel OCTAVE (or BANK/OCTAVE) [UP], [DOWN] keys.
On the MS2000R, this is effective only for a perfor- mance using the SELECT
Portmnt
The pedal switch will function as a portamento on/off switch.
56
