Korg MS2000R manual CopySeqAll, SwapSeq, Swap Seq

3Use the [+/YES] [–/NO] keys to select the copy source program.

4Use the CURSOR [®] key to move the cursor to the copy source timbre.

5Use the [+/YES] [–/NO] keys to select the copy source timbre.

If the copy source program is Single, it is not possible to select the copy source timbre (only timbre 1 is available).

6Use the CURSOR [®] key to move the cursor to the copy source sequence.

7Use the [+/YES] [–/NO] keys to select the copy source sequence.

8Use the CURSOR [®] to move the cursor to the copy destination sequence.

9Use the [+/YES] [–/NO] keys to select the copy destina- tion sequence.

0Use the CURSOR [®] key to move the cursor to “OK,” and press the [+/YES] key.

You will be asked to confirm the copy function.

26F UTILITY

Are You Sure OK?

APress the [+/YES] key once again.

The copy will be completed, and the display will indi- cate “Completed.”

BPress the [EXIT] key.

You will return to the first screen of the “CopySeq” func- tion.

G:CopySeqAll

This function copies all sequence data and settings from another timbre to the currently selected timbre.

Source Program	[A01...H16]
Select the copy source program.
Source Timbre	[1, 2]
Select the copy source timbre.

Procedure

1In LCD Edit mode, press the SELECT [16] key and then press the CURSOR [®] key six times.

The LCD screen will show Page 26G: UTILITY “CopySe- qAll.”

26G UTILITY

CopySeqAll OK?

2Press the [+/YES] key.

The LCD screen will indicate the copy source program (Source Program) and timbre (Source Timbre).

26G UTILITY

A01 T:1 OK?

Source Program Source Timbre

3Use the [+/YES] [–/NO] keys to select the copy source program.

4Use CURSOR [®] to move the cursor to the copy source timbre.

5Use the [+/YES] [–/NO] keys to select the copy source timbre.

If you selected a Single program as the copy source, it is not possible to select the copy source timbre (only tim- bre 1 is available).

6Use the CURSOR [®] key to move the cursor to “OK,” and press the [+/YES] key.

You will be asked to confirm the copy function.

26G UTILITY

Are You Sure OK?

7Press the [+/YES] key once again.

The copy will be completed, and the display will indi- cate “Completed.”

8Press the [EXIT] key.

You will return to the first screen of the “CopySeqAll” function.

H:SwapSeq

This function swaps the sequences of the currently selected timbre.

Swap Seq [1...3]

Select the sequence that you wish to swap.

Procedure

1In LCD Edit mode, press the SELECT [16] key and then press the CURSOR [®] key seven times.

The LCD screen will show Page 26H: UTILITY “SwapSeq.”

26H UTILITY

SwapSeq OK?

2Press the [+/YES] key.

The LCD screen will show the sequences that will be swapped (SwapSeq).

26H UTILITY

S:1 <> S:2 OK?

SwapSeq

3Use the [+/YES] [–/NO] keys and the CURSOR [®] key to specify the sequences that will be swapped.

4Use the CURSOR [®] key to move the cursor to “OK,” and press the [+/YES] key.

You will be asked to confirm the swap function.

26H UTILITY

Are You Sure OK?

5Press the [+/YES] key once again.

The copy will be completed, and the display will indi- cate “Completed.”

6Press the [EXIT] key.

You will return to the first screen of the “SwapSeq” func- tion.

48