Korg manual Rear panel, Select 1-16 keys, Phones jack MS2000R

GOCTAVE (MS2000), KEYBOARD (MS2000R)

MS2000

OCTAVE [UP], [DOWN] keys

These shift the pitch range of the keyboard in one-octave steps.

MS2000R [KEYBOARD] key

If this key is pressed to make the LED light, you can use the SELECT [1]–[16] keys to play the program.

HSEQ EDIT/

[SELECT•] key

For synth programs, this selects a sequence when creat- ing or editing sequence data. When a sequence is selected, use the sixteen knobs at the right to create the sequence data.

For a vocoder program, this is used to set the synthesis filter levels and panpot. In this case, the sixteen knobs at the right are used to set the various parameter values.

IBANK (MS2000), BANK/OCTAVE (MS2000R)

MS2000

[UP], [DOWN] keys

Select the program bank.

MS2000R

[UP], [DOWN] keys

If the [KEYBOARD] key is off (LED dark), these select the program bank.

If the [KEYBOARD] key is on (LED lit), these change the pitches assigned to the SELECT [1]–[16] keys in one- octave steps.

JSELECT [1]–[16] keys

In Program Play mode, use these to select programs. In LCD Edit mode, use these to select pages.

On the MS2000R, turning the [KEYBOARD] key on (LED lit) will cause these keys to function as a conve- nience MIDI keyboard, which you can use to play the program.

KPHONES jack (MS2000R)

Connect a set of headphones to this jack.

Rear panel

6 5 4 3 2 1

1OUTPUT

L/MONO, R jacks

Connect these to your powered monitor speakers, stereo amp, mixer, or multitrack recorder. If you are playing in mono, make connections to the L/MONO jack.

3ASSIGNABLE

SWITCH jack

Connect a switch pedal here.

PEDAL jack

Connect a volume pedal (expression pedal) here.

2AUDIO IN

AUDIO IN 1 jack

For synth programs, connect a synthesizer or audio device here. The input signal can be used as the oscilla- tor 1 waveform.

For vocoder programs, this will be the input jack for the external carrier of the vocoder.

AUDIO IN 2 jack

For synth programs, connect a synthesizer or audio device here. This can be used together with the AUDIO IN 1 jack as the oscillator 1 waveform.

For vocoder programs, connect a mic to this jack, and input the modulator audio signal.

[AUDIO IN 2 Level] switch

Set this according to the input source that is connected to the AUDIO IN 2 jack. If a mic is connected, set this to MIC. If a synthesizer or audio device is connected, set this to LINE.

4MIDI

MIDI IN connector

MIDI data is received at this connector. Connect it to an external MIDI device.

MIDI OUT connector

MIDI data is transmitted from this connector. Connect it to an external MIDI device.

MIDI THRU connector

MIDI data received at MIDI IN is re-transmitted without change from this connector. Use it when you wish to connect three or more MIDI devices.

5DC 9V

Connect the included AC adapter here.

8