F: Key Sync | [ON, OFF] |
Specify whether the arpeggiator will be synchronized to the keyboard.
If this is ON, the arpeggiator will always start from the beginning of the arpeggio pattern when you play the key- board. If you are performing together with other instru- ments, you can use this function to ensure that the arpeggio pattern is aligned with the beginning of the measure.
G: Resolution | [1/24...1/4] |
Specify the resolution (spacing of the notes) relative to the tempo specified by “Tempo.” (☞P.66 “How “Resolution” and “Sync Note” values correspond to note values”)
With a setting of 1/4, the arpeggio will be played as quarter notes of the specified tempo.
With a setting of 1/6, the arpeggio will be played as quarter note triplets of the specified tempo.
With a setting of 1/8, the arpeggio will be played as eighth notes of the specified tempo.
With a setting of 1/12, the arpeggio will be played as eighth note triplets of the specified tempo.
With a setting of 1/16, the arpeggio will be played as six- teenth notes of the specified tempo.
With a setting of 1/24, the arpeggio will be played as six- teenth note triplets of the specified tempo.
H: Swing |
|
This skews the timing of the
When Resolution = 1/8
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
Swing | +25 | +50 |
You will be asked to confirm the initialize operation.
26A UTILITY
Are You Sure OK?
3Press the [+/YES] key once again.
The program will be initialized, and the display will indicate “Completed.”
4Press the [EXIT] key.
You will return to the first screen of the “InitProgram” function.
B:InitTimbre
This function initializes the settings of the currently selected timbre.
Procedure
1In LCD Edit mode, press the SELECT [16] key, and then press the CURSOR [®] key once.
The LCD screen will show Page 26B: UTILITY “InitTim- bre.”
26B UTILITY
InitTimbre OK?
2Press the [+/YES] key.
You will be asked to confirm the initialize operation.
26B UTILITY
Are You Sure OK?
3Press the [+/YES] key once again.
The timbre will be initialized, and the display will indi- cate “Completed.”
4Press the [EXIT] key.
You will return to the first screen of the “InitTimbre” function.
■UTILITY
Here you can use various utility functions such as copy, ini- tialize, and swap (exchange) to help you edit more effi- ciently.
Page26: UTILITY
A: InitProgram
This function initializes the settings of the currently selected program (timbre, effect, arpeggiator).
When you initialize a program, its voice mode will be Sin- gle.
Procedure
1In LCD Edit mode, press the SELECT [16] key.
The LCD screen will show Page 26A: UTILITY “InitPro- gram.”
26A UTILITY
InitProgram OK?
2Press the [+/YES] key.
C: CopyTimbre
This function copies the setting of another timbre to the cur- rently selected timbre.
Source Program | [A01...H16] |
Select the copy source program. |
|
Source Timbre | [1, 2] |
Select the copy source timbre. |
|
Procedure
1In LCD Edit mode, press the SELECT [16] key, and then press the CURSOR [®] key twice.
The LCD screen will show Page 26C: UTILITY “Copy- Timbre.”
26C UTILITY
CopyTimbre OK?
2Press the [+/YES] key.
The LCD screen will show the copy source program (Source Program) and timbre (Source Timbre).
26C UTILITY |
|
A01 T:1 | OK? |
Source Program
Source Timbre
46
