Operating Your Washer, continued

6Select the appropriate cycle and settings for the load.

Press the POWER button to turn the unit on.

Turn the cycle selector knob in either direction to se- lect the cycle desired. The indicator for that cycle will be illuminated.

The estimated cycle time, suitable wash and rinse water temperatures, final spin speed, soil level, and options for each cycle will be indicated for the cycle selected. See the “Washer Settings Chart” for more details.

To change the settings, press the Wash/Rinse, Spin Speed and Soil Level buttons to scroll to the desired settings.

To select or delete an option, press the button for that option. The indicator will be illuminated when the op- tion has been selected. The indicator will no longer be lighted when the option has been deleted.

NOTE

To provide the best care for your laundry, not every setting or option is available with every cycle. If a setting or option is not available for the cycle selected, the indicator will not light.

7Start the washer.

Close the door and press START. The washer will not

operate with the door open. will be displayed as a reminder to close the door.

Select Delay Start to delay the beginning of the cycle, if desired.

As a safety measure, the door will automatically lock during the entire wash cycle.

To add a forgotten item to the washer any time during the wash portion of the cycle, press PAUSE. When the door unlocks, open the door, add the item, close the door and press START to resume the cycle.

If changes to the settings or options are attempted after the cycle starts, you will hear several beeps

Operating Instructions

when the buttons are pressed. To change the settings or options, press PAUSE, make the new selections and press START again.

To change the cycle once the cycle has begun, press POWER to cancel the current cycle, press POWER to turn on unit again, select a new cycle, and press START again. Just turning the cycle selector knob will not change the cycle.

To stop the cycle, press POWER.

A signal will sound at the end of the cycle if the Chime option has been selected.

Remove items from the washer when the cycle ends and place in dryer, line dry or dry flat as directed on the fabric care label.

For best results

Follow the fabric care label instructions on items to be washed.

Excess wrinkling, color transfer or odors may develop in items left in the washer after the cycle has ended, if not removed promptly.

CAUTION

ENTRAPMENT and TIP-OVER HAZARD

Do not leave the door open if there are small children or pets present. An open door could entice children to hang on the door or crawl inside the washer. If there are no small children present, you may leave the door ajar to prevent odor build up.

15

Page 15
Image 15
Kenmore 417.4110* Select the appropriate cycle and settings for the load, Start the washer, Entrapment and TIP-OVER Hazard