Kenmore 010, 519 To Sew from the Beginning of a Combination Pattern With Key, Twin Needle Sewing

To Sew from the Beginning of a Combination

Pattern	with	Beginning	Key
Example:	pattern 30
(_ Stitch pattern:			28, 32, 70
Needle	thread tension		3 to 4
Presser	foot	F:	Satin stitch foot
Pressure dial			3

•To sew

Press the key. Select pattern 28. Select pattern 32. Select pattern 70. Start to sew (_.

Press start/stop key in the middle of a programmed pattern _.

Press the key.

The entire memorized pattern shows up _.

You can start sewing the combination pattern from the beginning.

Twin Needle Sewing

Notes:

•When you sew patterns with the twin needle, test the stitches first before you try.

Use zigzag foot or satin stitch foot for twin needle sewing. Try satin stitch foot when zigzag foot makes a wrinkled appearance and distorted pattern on the fabric.

•Do not set the stitch width at more than 3.5, otherwise the needle will hit the needle plate and the needle wilt break.

•You can not sew the following patterns with twin needle, the message _ appears on the visual touch screen if you select one of them:

3, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 51, 86, 87, 88, 89, 90, 97, 98, 99, 110, 113, 116, 120, 121,123,

124,125,126,127 and 128.

To sew

Insert an additional spool pin, and put a felt on the spool pin. Draw both threads from the spools and pass them through the points from 1 to 5.

Make sure that the two strings of thread from the spools will not get tangled.

Slide one of the threads through the needle bar thread guide on the left, and the other one on the right. Thread the needles from the front to back.

Press the twin needle key (_.

Select the desired pattern and sew.

Notes:

•Make sure each of the threads wind off from the spools as shown.

•The built-in needle threader cannot be used for the twin needle.

•When changing the sewing direction, raise the needle and turn the fabric.

f

@®

F-

@

/

@

Thi_ Pattern is no_for Twin Needle

/

49