REMOTE CONTROL
Precaution:The Remote Controllerwillnot operate properlyif stronglight strikesthe sensorwindowof the air conditioneror if there are obstaclesbetweenthe Remote Controllerand the air conditioner.
POWER
•To turn the unit ON, pushthe button.To turnthe unitOFF, push the button again.
•This button takes priorityover any otherbuttons.
•When you first turn it on, the unitis on the High coolmode and the temp. at 72°F
TEMPERATURE SETTING
•This button can automaticallycontrolthe temperature
of the room. The temperaturecan be set within a rangeof 60°F to 86°F by I°F.
Select the lower numberfor lowertemperatureof the room.
FAN SPEED
•Everytime you push this button it is set as follows. (High - Low - High...)
ON/OFF TIMER
- STOPPING OPERATION
•Everytime you push this button, when the unit is operating, timer is set as follows.
(1Hour- 2Hours- 3Hours-
7Hours_
•The Setting Temperature will be raised by 2°F 30min. later and by 2°F after another 30 min.
-STARTING OPERATION
•Everytime you push,this button, when the unit is
not operating, timer is set as follow.
(1Hour- 2Hours- 3Hours- 4Hours- 5Hours- 6Hours
7Hours- 8Hours_gHours-
ENERGY SAVER
The fan stops when the compressorstops cooling.
•Approximately every 3 minutesthe fan willturn on and check the roomair to determine if coolingis needed.
COOL/FAN
•Everytime you push this button, it willtoggle between COOL and FAN.
•II FAN SPEED
TtMER MODE
ENERGY
SAVER