FEATURES | USING | THE AIR CONDITIONER |
| _To | reduce the risk of fire, electric |
| shock, or injury to persons, read the important | |
7 | SAFETY instructions section before operating this | |
1 |
| |
| appliance. |
|
| To begin operating the air conditioner after | |
| installation, | follow these steps: |
t. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension cord or an adapter plug.)
2. Set the TEMP control to the lowest number.
3. Set the MODE control to the COOL.
4. Adjust the louvers for comfortable air flow.
5. Once the room has cooled, adjust the TEMP and
FAN SPEED control to the setting you find most comfortable.
8
NOTE : If the air conditioner is turned off, wait 3 minutes before restarting. This allows pressure inside the compressor to equalize. Failure to wait 3 minutes before restarting may cause inefficient operation.
If you move the TEMP control to a warmer, then immediately back to a cooler setting, the unit will run without compressor on. Wait 3 minutes before restarting.
Review the DISPLAY section for other settings.(See page 10)
FIG. 12
1.Cabinet
2.Horizontal Air Direction Control Tab
3.Cool Air Discharge
4.Inlet Grille
5.Air Filter
6.Control Board
7.Upper Guide
8.Curtain
9. Remote Control
_9-