Kenmore 625.344800 owner manual HOW Your Purifier Works, Stopping Unit During Operation Model

HOW YOUR PURIFIER WORKS

T_e Purifier distills and turns ordinary tap water into clean, clear purified water. Uses for purified water in- elude drinking, cooking, ice cubes, salt-restricted diets, baby formulas, steam irons, photo processing, and cleaning contact lenses.

By heating water to boiling, the water is changed to steam, which rises. As the steam cools and turns back

into water, itis collected in the carafe. Impurities are left behind in the kettle.

Purified water will remain fresher-tasting if it is kept

tightly capped. Also shaking the carafe before pouring win aerate the water and make it taste better.

Order extra carafes from Sears (see page 7) so you can chill one bottle of purified water while you make more,

STOPPING UNIT DURING OPERATION (MODEL 344800)

1. Remove Kettle. 2. Unplug unit from outlet.

OPTIONAL ELECTRONICS (MODEL 344810)

Control Buttons

From left to right the control buttons are "START/ STOP", "HOUR", "MINUTE", and "DELAY".

Time Setting

When the time is blinking in the display window indi- catas that the supply voltage has been interrupted. The time willcontinue to run but will only appear continuous- ly in the display window after resetting.

Setting the time display:

Hours:

To move the hours upwards by one hour: press the =HOUR" button quickly once. To fast forward the time: press for at least one second. After completion the time display will blink far another 3 seconds before the time is finally set.

Minutes:

To move the minutes upwards by one minute: press the "MINUTE" button quickly once, To fast forward the time: prass for at least one second. After completion the time display will blink for another 3 seconds before the time is finally set.

12-24 Hour Mode:

Pressing the =HOUR" and "MINUTE" buttons simulta- neously for 5 seconds enables change over from 12 hour mode to 24 hour mode (or from 24 hour mode to 12 hour mode). Further change overs are only possible

after 5 seconds (and only when the"HOUR" and "MIN- UTE" buttons are pressed as described above).

In the 12 hour mode the display shows AM or PM.

Setting the Delay Function/Checking Delay Status:

Setting:

Press the "DELAY" button once, The Delay Start Time and "DELAY" indicator appear in the display window.

The "Delay Start Time" can be changed as follows: Hours: Press the "HOU R" button once, after which the hour figure blinks for 3 seconds in the display window. During these 3 seconds the hours can be forwarded by one hour by pressing the hour button once. By continu- ous pressing of the button, the time can be fast-for- warded.

Minutes: Press the "MINUTE" button once, after which the minutes figure blinks for 3 seconds in the display window. During these 3 seconds the minutes can be forwarded by one minute by pressing the minute button once. By continuous pressing of the button, the time can be fast-forwarded.

If the time is correctly set, after 3 seconds the time re- appears with =DE LAY" in the display. The "DELAY" indi- cetes that the delay time function is activated. To deac- tivate the delay time function, press the "DELAY' button twice within a period of 3 seconds, or press the "DELAY" button once while in the delay mode. After completion, "DELAY" will not appear next to the time in the display window.

3