Kenmore 625.38356, 625.39356 Suggested Slab Foundation Installation, Draw Your Pipes Fittings

Suggested Slab Foundation Installation

Plug the	softener		transformer
into an inside,		120 volt 60Hz
electrical	outlet. If an outside			outside
outlet is used,		be	sure it has	-soft
approved	weather		protection.

WATER SOFTENER (install in garage, car port,

or other sheltered area)

water heater

kitchen

bathroom

bypass

valve outside -soft

outside

-hard

For outside hard water, trench under- ground as needed.

outside - hard

water in

Run drain tubing to laundry tub or p-trap inside home, if possible. Otherwise, run to a dry well.

DRAW	IN YOUR PIPES
AND FITTINGS
Draw the plans for your "IN" and "OUT"		Left
piping here. Include all pipe, fittings and
accessories you will use.
Make a list of all materials you will need
and buy them before you begin to install
the water	softener.
	120V - 60Hz
	ElectricalOutlet U

Valve Outlet Side

FIG. 4

Your House Main Water Pipe

Right

*In what direction does the water flow?

Be sure to plan "IN" and "OUT" piping so water flow is to the softener valve inlet. Plan a

crossover if flow is from left to right.

CROSS-OVER

Main Water Pipe

Raw

Soft Water

OutletInlet

Valve Inlet

To Water Softener

FIG. 5

Questions? Call The Kenmore Water Line 1-800-426-9345

8