TYPICAL INSTALLATIONS / TOOLS AND MATERIALS NEEDED
INSTALLATION ON COPPER PLUMBING USING COMPRESSION FITTINGS
FILTERED
WATER
apply several wraps of Teflon tape
optional shutoff valve
nut
brass ferrule
compression adaptor
INLET
3/4" NPT
WATER
IN
Note: Be sure to allow a minimum space of
- MATERIALS AND TOOLS NEEDED -
I_ 2 compression adaptors, 3/4" NPT x comp. (compression end to fit existing copper pipe) I_ Teflon tape
I_ tubing cutter
I_ sandpaper or
I_ 2 wrenches, either open end or adjustable jaw, size to fit compression adaptors
SOLDERED COPPER INSTALLATION
(OBSERVE FIG. 1 NOTES)
adaptor,
....... 3/4" NPT x sweat
(apply several wraps of
Teflon tape to threads)
IN i/}J
WATER
optional shutoff valve 3/4" copper pipe, as req'd.
- MATERIALS AND TOOLS NEEDED -
(see page 5)
THREADED INSTALLATION
(OBSERVE FIG. 1 NOTES)
3/4" hex nipple (2)
3/4" nipple
optional shutoff valve | union fitting (2) / |
| |
- MATERIALS AND TOOLS NEEDED - | 3/4" pipe, as required |
| |
(see page 6) |
|
