ULTRAWASH*Soil
RemovalSystem
The ULTRA WASH soil removal system gives you sparkling clean dishes, while using less energy and time. The ULTRA WASH soil removal system includes:
•A
•An ULTRA WASH sensor to monitor soil level and adjust the cycles as needed.
How the ULTRA WASH soil removal system works:
1.Load the dishwasher. Remove bones, large chunks or
2.Hot water fills the dishwasher to a level near the bottom of the overfill protection float.
3.The Water Heating indicator glows and the dishwasher pauses while the water is heated.
4.When the water reaches the proper temperature, the
Water Heating indicator turns off and the cycle countdown resumes.
5.Detergent from the detergent dispenser is dispensed at the correct cycle times and hot water is pumped through the ULTRA WASH pump.
6.Hot water and detergent sprays against the soiled surfaces of the load and removes food particles.
7.Food soil is held in an accumulating chamber.
8.Food soil is disposed down the drain with the wash water.
9.Fresh, hot water enters the dishwasher and sprays on
the dishes. The rinse water is then pumped through the ULTRA WASH soil removal system and remaining soil is removed.
10.The food soil that is held in the ULTRA WASH soil
removal system is disposed down the drain with the rinse water.
11.The final rinse water is heated. The rinse aid is added to the water for the final rinse to prepare the dishes for drying.
How the ULTRA WASH sensor adjusts the cycle:
1.The SENSING indicator glows when the ULTRA WASH
Sensor is measuring the amount of soil in the dishwasher.
2.After the soil level is determined, unnecessary portions of the cycle are skipped.
7
