Kenmore 665.15737, 665.16734 Drying System, Cycle Status Indicators, Overfill Protection Float

Air Dry

Select this energy-saving option to dry without heat. Air drying is useful when loads contain plastic dinnerware that may be sensitive to high temperaturesQ.

LOCKON

The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: Quick Rinse automatically uses this option. Air Dry is an option with all other cycles.

Lock On

Use the Lock to prevent unintended use of the dishwasher. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle.

LOCK ON

When LOCK ON is lit, all buttons are disabled.

NOTES:

•The dishwasher door can be opened while the controls are locked.

•You can turn on the Lock while the dishwasher is running.

To turn on the Lock

Press and hold

Q

LOCKON

for 4 seconds. LOCK ON glows.

If you press any pad while your dishwasher is locked, the light flashes 3 times.

To turn off the Lock

Press and hold AIR DRY for 4 seconds. The light turns off,

Delay Hours

Select this option to run your dishwasher at a later time or during off-peak hours.

To delay the start

1.Close the door.

2.Select a wash cycle and options.

3.Press DELAY HOURS 1 time for a 2-hour delay, 2 times for a 4-hour delay, or 3 times for a 6-hour delay.

HOURS 2 4 6 ID •D ••

@

The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.

4.Press START.

NOTE: To cancel the delay, press CANCEL/DRAIN until all Delay Hours lights are off.

IMPORTANT:

•Operate your dishwasher only when you are at home.

•If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.

Cycle Status Indicators

Follow the progress of your dishwasher with the Cycle Status indicators.

o WASHING

_le HEATING

DRYING

SANITIZED

91b CLEAN

Heating

HEATING glows, and the cycle progression pauses, whenever water is heated during a cycle, Wash or rinse action continues as the water heats.

Sanitized

If you select the Sani Rinse option, SANITIZED glows when the

Sani Rinse cycle is finished. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted. The light goes off when you open the door.

Clean

CLEAN glows when a cycle is finished. The light turns off when you open the door or press CANCEL!DRAIN.

Drying System

During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.

IMPORTANT: The vapor is hot. Do not touch the vent during drying.

Overfill Protection Float

The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.

Check under the float for objects that may keep the protector from moving up or down.

14