Kenmore 6800, 7800, C6801 manual Contents, Table des matires

Table	of Contents
DRYER SAFETY					2
CHECK		YOUR		VENT SYSTEM
FOR GOOD			AIR FLOW		4
USE EVENHEAT TM AUTO DRY
CYCLES		FOR BETTER FABRIC
CARE AND			ENERGY SAVINGS		4
CONTROL			PANEL
AND	FEATURES				5
CYCLE GUIDE				.......................................	6
USING		YOUR		DRYER	7
DRYER CARE					9
TROUBLESHOOTING					12
PROTECTION				AGREEMENTS'°	14
WARRANTY			........................................		14
ASSISTANCE				OR SERVICE	44

Indice						Table des mati_res
SEGURIDAD						SECURITEDE LA SECHEUSE				29
DE LA SECADORA				...........................	15	VERIFICATION			D'UNE
REVISE QUE			EL SISTEMA			CIRCULATION			D'AIR ADEQUATE
DE VENTILACION				TENGA		POUR LE SYSTEME
UN BUEN FLUJO DE AIRE					17	D'EVACUATION			..................................	31
UTILICE LOS ClCLOS						UTILISATION		DES PROGRAMMES
AUTOMATICOS				PARA UN		AUTOMATIQUES			POUR UN
MEJOR	CUIDADO			DE LAS TELAS		MEILLEUR	SOIN		DU TISSU ET
Y AHORRO			DE ENERGIA		17	DAVANTAGE		D'F:CONOMIES
PANEL DE CONTROL						D'ENERGIE		...........................................		31
Y CA RACTERISTICAS					18	TABLEAU	DE COMMANDE
GUIA	DE CICLOS			..............................	19	ET CARACTERISTIQUES				32
USO DE LA SECADORA					21	GUIDE DE	PROGRAMME			33
CUIDADO		DE LA SECADORA			23	UTILISATION		DE LA SECHEUSE		35
SOLUCI6N			DE PROBLEMAS		26	ENTRETIEN		DE	LA SECHEUSE	37
CONTRATOS			DE PROTECCION		..... 28	DF:PANNAGE		.....................................		40
GARANTIA			........................................		28	CONTRATS		DE	PROTECTION	42
AYUDA	O	SERVICIO TECNICO			..... 44	GARANTIE		.........................................		42
						ASSISTANCE		OU SERVICE		44

CHECK YOUR VENT SYSTEM FOR GOOD AiR FLOW

Maintain good air flow by:

[] Cleaning your lint screen before each load.

[] Replacing plastic or foil vent material with 4" (102 mm) diameter heavy_ rigid vent material.

Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.		[]	Using the shortest length of vent possible.
		[]
			Using no more than four 90 ° eibows in a vent system;
Failure to follow these instructions	can result in death
			each bend and curve reduces air flow.
or fire.
			Bett

Good Air Flow

Along with heat, dryers require good air flow to eff:icientiy dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See "installation Instructions".

The venting system attached to the dryer plays a big role in good air flow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless of who installed the dryer.

[] Removing lint and debris from the exhaust hood.

[] Removing lint from the entire length of the vent system at least every 2 years. When cleaning is complete,

be sure to follow the "Installation Instructions" supplied with your dryer for final product check.

[] Clearing away items from the front the dryer.

USE EvenHeat TM AUTO DRY CYCLES FOR BETTER FABRIC CARE AND ENERGY SAVINGS

Use the Evenheat TM Auto Dry Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Evenheat TM Auto Dry Cycles, drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off: when the load reaches the selected dryness. Choose Normal to save energy.

With Time Cycles, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due

to over-drying. Use Time Cycle for the occasional damp load that needs a little more drying time or when using the drying rack.

4