CONTROL PANEL AND FEATURES
/
| EVENHEAT AUTO | DRY | |
| Norma |
| |
| Bu | ual | |
Damp | Heavy Dut | Delicates | |
Cool Down |
|
| |
Dry |
|
| |
Wrinkle Guard |
|
| |
CheckLintScreen | Time | press Dry | |
| |||
| TiME- CYCLES |
| |
_ AutoMoistureSensing | POWER | START/PAUSE | |
er,ergy savilg ecn ,ology | |||
|
|
Not all features and options are available on all models.
Appearance may vary.
OCYCLE STATUS LIGHTS
Lights indicate the progress of the drying cycles.
O DRYER CYCLE KNOB
Use your Dryer Cycle Knob to select availabie cycles on your dryer, Turn the knob to select a cycle for your laundry load, See "Cycle Guide" for detailed descriptions of cycles.
EvenHeaf TM Auto Dry
with Auto Moisture Sensing Control
Auto Dry cycles give the best drying in the shortest time. Drying time will vary based on fabric type, load size, and dryness setting.
Time Cycles
Will run the dryer for the specified time on the control. Press the Dry Temp button to change the drying temperature from the default setting, if desired. Press the Less Time or More Time buttons to change the drying time from the default setting, if desired.
Time Dry
Wrinkle Guard TM Feature
When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE
GUARD TM feature periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming.
[] WRINKLE GUARD TM gives you a period of
Cycle Signal
The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired volume (Off, Low, or High) is selected.
NOTE: When the Wrinkle Guard TM setting is selected and the Cycle Signal is on, the tone will sound every
20 minutes until the clothes are removed, or the Wrinkle Guard TM setting ends.
Default dry time setting is 40 minutes.
Express Dry
Default dry time setting is 23 minutes.
O OPTIONS AND SETTINGS
Dry Temp (for use wlth Time cycles only)
Damp Signal (for use with Evenheaf TM Auto Dry Cycles only)
Selecting the Damp Dry Signal will alert you when your
clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing.
START/PAUSE BUTTON
Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select for a load,, select the lower setting rather than the higher setting. See "Cycle Guide".
NOTE: The Air Only Temp Feature is not available on the Auto Dry Cycles.
Dry Level (for use with EvenHeaf TM Auto Dry Cycles only)
Use with Auto Dry cycles to select the desired dryness level. See "Cycle Guide".
Press START/PAUSE to start a cycle, or press START/PAUSE once while a cycle is in process to pause it.
POWER BUTTON
Press to turn the dryer on and off.
