Select desired cycle, WrinkJe GuardTM feature

3. Press POWER

POWER

Press POWER button to turn on the dryer.

4.Select desired cycle

EVENHEAT AUTO DRY

Normal

Dry Temp (for use with Time Cycles only)

Press the Dry Temp button to change the drying temperature from the default setting.

Dry Level (for use with Auto Cycles only)

Normal Dry Level is a good starting point for optimal energy savings.

You can select a different Dry Level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More,

Normal, or Less automatically adjusts the Dry Level at which the dryer will shut off. Once a Dry Level is set, it cannot be changed without stopping the cycle.

Auto Dry cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is used for a starting point for Auto drying. Less Dry removes Jess moisture and is used for loads you may want to put on a hanger

to complete drying.

WrinkJe GuardTM feature

[] Get up to 60 or 150 minutes for models with two choices (90 minutes for models with only one choice) of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE GUARD TM button to turn On or Off: at any time before the cycle has ended.

[] The WRINKLE GUARD TM feature is preset to "Off:". Jf selected for other cycles, the WRINKLE GUARD TM feature setting will remain "On" the next time that cycle is selected.

TiME CYCLES	6. Select cycle options (if desired)

Select the desired cycle for your load. See "Cycle Guide" or "Control Panel and Features".

5.Set cycle settings

High
Med	High
Medium
Low		60 Min
		150 Min
Air	Only	Off

TIME CYCLES ONLY AUTO CYCLES ONLY

The default cycle settings will illuminate based on the cycle selected. See "Cycle Guide". For some cycles, you may select alternate settings by pressing the button for that setting.

NOTE: Not all options and settings are available with all cycles.

--TIME

CYCLES --

AUTO CYCLES ONLY OFF/LOW/HIGH

Press appropriate button for selected options, Jf desired. For Time Cycles, press More Time Jf you want to increase the cycle length, or press Less Time Jf you want to decrease the cycle length. Less Time and More Time options are available with Time Cycles only.