FEATURES | USING THE AIR CONDITIONER |
| To reduce the risk of fire, electric |
| shock, or injury to persons, read the important |
| SAFETY instructions section before operating this |
| appliance |
1 | 16 | 4 | 6 | 8 | 5 | 73215 |
109 12131114
1.Cabinet
2.Vertical Air Deflector (Horizontal Louver)
3.Cool Air Discharge
4.Front GriUe
5.Inlet Gdlle
6.Air Filter
7.Knob
8.Air Intake
9.Power Cord
10.Evaporator
11. Condenser
12.Compressor
13.Base pan
14.Brace
15.Upper Guide
16.Curtain
To begin operating the air conditioner after installation, follow these steps:
1.Plug in the air conditioner.(To prevent electrical hazards, do not use an extension cord or an adapter plug.)
2.Set the exhaust vent to the CLOSE position.
3.Set the TEMP Control to the coolest setting.
4.Set the MODE control at the highest COOL level.
5.Adjust the louver for comfortable air flow.
6.Once the room has cooled, adjust the TEMP Control to the setting you find most comfortable.
NOTE : If the air conditioner is turned off, wait 3 minutes before restarting. This allows pressure inside the compressor to equalize. Failure to wait 3 minutes before restarting may cause inefficient operation.
Review the AIR CONDITIONER FEATURES section for other settings.(See page 11)
