Self=Cleaning

(cont'd)

 

 

 

INSTRUCTIONS

PRESS

DISPLAY

Stopping or Interrupting a Self=Cleaning Cycle

 

 

if it becomes necessary to stop or interrupt a self-cleaning cycle due to

 

 

excessive smoke or fire in the oven:

 

 

1. Press @.

 

 

Figu re 1

2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR", "LOCKED" icon is no longer displayed, the oven door can be opened (Figure 1).

IMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant element remains ON.

2.A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3, If a Self-Clean cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Clean cycle to finish.

4, If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Self-Clean 12-24 hours in advance see instructions to set the control for the 24 hour time of day display mode.

Adjusting Oven Temperature

The temperature in the oven has been preset at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

INSTRUCTIONSPRESS

To adjust the oven temperature higher

t. Press_

for6 seconds (Figure 2).

2.To increase the temperature use the number pads to enter the

desired change. (Example 30°F) (_

@

(Figure 3). The

(Z)@

temperature may be increased as much as 35°F (t 9°C).

 

3.Press (_ to accept the temperature change and the display will

return to the time of day (Figure 4). Press

_)

to reject

the chaRge

@

 

if necessary.

 

 

 

 

 

 

To adjust the

oven temperature

lower

 

 

 

1. Press _

for 6 seconds. 0° will appear

in the display

(Figure 2).

 

2.To decrease the temperature use the number pads to enter the

desired change.

(Example -SO°F)(_

@

and then

press

Q@

 

(Figure

5). The temperature may be decreased

as much as

@

35°F (19°C).

 

 

 

 

 

 

3. Press

(_

to accept the temperature

change

and the display will

 

return

to the time

of day (Figure 4). Press _

to reject

the change

@

if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

36

 

Note: The oven

temperature adjustments made with this feature

will not change the Self- Clean cycle temperature.

DISPLAY

Figure 2

Figure 3

Figure 4

Figure 5

Page 36
Image 36
Kenmore 790.4660 manual Self=Cleaning Contd, Adjusting Oven Temperature, Stopping or Interrupting a Self=Cleaning Cycle