Kenmore 790.467 manual Consumer Defined Control, Press Display

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The _'_oPpad- controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

iNSTRUCTIONS PRESS DISPLAY

To activate the Oven Lockout feature

1. Press and hold _ for 3 seconds.

2.After 3 seconds "Loc" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure t ).

Qfor 3

seconds

Figure 1

To reactivate normal oven operation:

1.Press and hold _TO_ for 3 seconds. A beep will sound. The

v

"DOOR LOCKED" will flash in the display until the oven door has completely unlocked (Figure 2).

2.The wall oven is again fully operational.

Q for 3

seconds

Figure 2

iii:Si_

Setting Silent Control Operation

The DELAY TIME _t_ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control

v

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS PRESS DISPLAY

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press

	and hold	_.	"--:--" will appear and "DELAY"	will flash in the	Q
	display (Figure		3). After 7 seconds "SP" (Speaker) will appear in		for 7 seconds
	the display (Figure 4).				Q
2.	Press _	to switch between normal sound operation and
	silent operation mode. The display will show either "SP" (Figure
	4) or ":--"	(Figure 5).
	If "SP" appears (Figure 4), the control will operate with normal
	sounds and beeps. If ":- -" appears (Figure 5), the control is in
	the silent	operation mode.
3.	Press	to accept the change or press		to reject the	Oil"
			@

change.

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature even if the control is set to silent operation.

Figure 3

Figure 4

Figure 5

has been reached,

17