Kenmore 790.4717, 790.4778, 790.4783 manual Control Pad Features, For a silent control panel

Control Pad Features

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions

are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

OVEN

CLOCK

SET

COOK TIME

UP and DOWN ARROWS

PADS

Used

ADD 1 MINUTE PAD

Used to add 1

BAKE

PAD--

INTERIOR

PAD

Used to

PAD

Used to

along

with the

function

pads

to select

minute to the Timer Count-down.

This

Used to

select

LIGHT

PAD

set the time

enter

the length

oven

temperature,

cook

time,

start

time

feature

works

with the

Kitchen

Timer

the

bake

Used

to turn

of day.

of the

baking

(when

programming

an

automatic

start

only

and does

not affect any

cook

time

function.

oven

interior

light

--_

time.

\

time), time of day, clean time and

or start

time

functions.

(some

models).

ON and

OFF._

_

X

minute timer.

INDICATOR

TIMER SET/O FF_AD

X

_

LIGHTS--

Used

to set or cancel

\

_,

X

•

•

These

light

to

the minute tirner_"The

_

_

show which

minute

timer

doe_

C) _

_'3(_)_

_1;_'_

feature

is in

start

or stop

cooking_--,_,,,_

_

\_

use.

Also,

TIMER

SET/OFF

Pad

is used

to set the

_

®

®

®

BROIL

PAD--

Continuous

Bake

_

_

_

_'X

_

Used

to select

SELECT

SELF-

_

W

_

®

Prehea{

function.

CLEAN

PAD Used to

_

@ Beer locked

WARM

& HOLD

Cleaning

cycle. A 2, 3

_lleea ct)

set the

Warm

&

Feature.

Self-Clean

(_sfteer)o

_

®

Oven

_t_

the

variable

broil

or 4 hour

Hold

feature.

time

may be selected

select

the Self-

_OVE

/_

PAD--

Used

to

(some

models).

N, PREHEAT

& DOOR

LOCK

LIGHTS*

The "Oven"

light

STOP

CLEAR PAD--

Used to clear

DELAY START PAD Used to set the

will

glow each time

the

oven

unit

turns on to

maintain

the set

any function

previously

entered

oven

temperature.

The

"Preheat"

light

will

glow when the oven

except

the time of day and

minute

desired start time for baking. May be

is first

set to operate, or

if the desired temperature

is reset

timer. Press

STOP

CLEAR

to stop

used

with COOK

TIME

to

program a

higher

than

the actual

oven temperature.

The "Door

Locked"

cooking.

Also the

STOP

CLEAR

delayed

bake cycle or

a delayed

clean

light

will flash until the door locks when the

self-clean

cycle

is in

pad is used to activate

oven lockout

cycle,

use.

It glows constantly

after

the

door locks

(some

models),

setting.

(some models).

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When preheat indicator light turns OFF, your oven is ready.

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation.

1. To tell if your oven is set for normal or silent operation press and hold _ for 7 seconds. "= = " or "SP" appears in

the display.

2.Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode. The display will show either "- - " or "SP".

3.Wait 5 seconds to return to normal operating mode.

If "SP" appears, the control will operate with normal sounds and beeps. If "- - " appears, the control is in the silent operation mode.

Temperature Conversion (Fahrenheit / Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Press and hold for 7 seconds until °F or °C appears in the display.

2.Press the/,,, or v pad to change °F to °C or °C to °F.

3.Wait 5 seconds to accept the changes or press __ to reject the changes.